AN2531 Datasheet, PDF (1/28 Pages) Motorola, Inc – Standard Space Vector Modulation with Dead-Time Correction - XOR version TPU Function Set

Application Note
AN2531/D
Rev. 0, 5/2003
Standard Space Vector
Modulation with Dead-Time
Correction – XOR version
TPU Function Set
(svmStdDtXor)
Freescale Semiconductor, Inc.
By Milan Brejl, Ph.D.
Functional Overview
The Standard Space Vector Modulation with Dead-Time Correction – XOR
version (svmStdDtXor) is a version of the Standard Space Vector Modulation
with Dead-Time Correction (svmStdDt) function that uses two TPU channels to
generate one PWM output channel. The TPU channel outputs are connected
to an XOR gate whos output is the required PWM signal. See Figure 1. An
advantage of this solution is the full range 0% to 100% of PWM duty-cycle
ratios. There is no MPW (minimum pulse width) parameter to limit the edge
duty-cycle ratios in this version, unlike in the svmStdDt. A disadvantage is that
the number of assigned TPU channels is doubled.
AT1
XOR
Phase A - top
AT2
AB1
XOR
Phase A - bottom
AB2
BT1
XOR
Phase B - top
BT2
BB1
XOR
Phase B - bottom
BB2
CT1
XOR
Phase C - top
CT2
CB1
XOR
Phase C - bottom
CB2
Figure 1. Functionality of XOR version – illustration
For More Information On This Product,
Go to: www.freescale.com
© Motorola, Inc., 2003