4N35 Datasheet, PDF (1/6 Pages) Motorola, Inc – STANDARD THRU HOLE CASE 730A-04

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator™
6-Pin DIP Optoisolators
Transistor Output
The 4N35, 4N36 and 4N37 devices consist of a gallium arsenide infrared
emitting diode optically coupled to a monolithic silicon phototransistor detector.
• Current Transfer Ratio — 100% Minimum @ Specified Conditions
• Guaranteed Switching Speeds
• Meets or Exceeds all JEDEC Registered Specifications
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
• General Purpose Switching Circuits
• Interfacing and coupling systems of different potentials and impedances
• Regulation Feedback Circuits
• Monitor & Detection Circuits
• Solid State Relays
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Reverse Voltage
Forward Current — Continuous
LED Power Dissipation @ TA = 25°C
with Negligible Power in Output Detector
Derate above 25°C
VR
6
Volts
IF
60
mA
PD
120
mW
1.41
mW/°C
OUTPUT TRANSISTOR
Collector–Emitter Voltage
Emitter–Base Voltage
Collector–Base Voltage
Collector Current — Continuous
Detector Power Dissipation @ TA = 25°C
with Negligible Power in Input LED
Derate above 25°C
VCEO
VEBO
VCBO
IC
PD
30
Volts
7
Volts
70
Volts
150
mA
150
mW
1.76
mW/°C
TOTAL DEVICE
Isolation Source Voltage(1)
(Peak ac Voltage, 60 Hz, 1 sec Duration)
VISO
7500
Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
TA
– 55 to +100
°C
Tstg – 55 to +150
°C
Soldering Temperature (10 sec, 1/16″ from case)
TL
260
°C
1. Isolation surge voltage is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 2
©^MM^oot^to^or^ro^ola^l,^aIn^Oc.^p1^t9^o9^e5^{lectronics Device Data}
Order this document
by 4N35/D
4N35*
4N36
4N37
[CTR = 100% Min]
*Motorola Preferred Device
STYLE 1 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
6
2
5
3
4
PIN 1. LED ANODE
2. LED CATHODE
3. N.C.
4. EMITTER
5. COLLECTOR
6. BASE
1