1N5400 Datasheet, PDF (1/2 Pages) Motorola, Inc – STANDARD RECOVERY RECTIFIERS 50-1000 VOLTS 3.0 AMPERE

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by 1N5400/D
Axial-Lead
Standard Recovery Rectifiers
Lead mounted standard recovery rectifiers are designed for use in power supplies
and other applications having need of a device with the following features:
• High Current to Small Size
• High Surge Current Capability
• Low Forward Voltage Drop
• Void–Free Economical Plastic Package
• Available in Volume Quantities
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 1.1 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal Leads are
Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
• Shipped in plastic bags, 5,000 per bag.
• Available Tape and Reeled, 1500 per reel, by adding a “RL” suffix to the
part number
• Polarity: Cathode Indicated by Polarity Band
• Marking: 1N5400, 1N5401, 1N5402, 1N5404, 1N5406, 1N5407, 1N5408
1N5400
thru
1N5408
1N5404 and 1N5406 are
Motorola Preferred Devices
STANDARD
RECOVERY RECTIFIERS
50–1000 VOLTS
3.0 AMPERE
CASE 267–03
MAXIMUM RATINGS
Rating
Symbol 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
50
VRWM
VR
100
200
400
600
800
1000 Volts
Non–repetitive Peak Reverse Voltage
VRSM
100
200
300
525
800
1000 1200 Volts
Average Rectified Forward Current
IO
(Single Phase Resistive Load,
1/2″ Leads, TL = 105°C)
3.0
Amp
Non–repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions)
IFSM
200 (one cycle)
Amp
Operating and Storage Junction
TJ
– 65 to +170
°C
Temperature Range
Tstg
– 65 to +175
THERMAL CHARACTERISTICS
Characteristic
Symbol
Typ
Unit
Thermal Resistance, Junction to Ambient (PC Board Mount, 1/2″ Leads)
R_θJA
53
°C/W
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Min
Typ
Max
Unit
*Instantaneous Forward Voltage (1)
(iF = 9.4 Amp)
vF
—
—
1.2
Volts
Average Reverse Current (1)
DC Reverse Current (Rated dc Voltage, TL = 80°C)
IR(AV)
—
IR
—
—
500
µA
—
500
* JEDEC Registered Data.
(1) Measured in a single phase halfwave circuit such as shown in Figure 6.25 of EIA RS–282, November 1963. Operated at rated load conditions
TL = 80°C, IO = 3.0 A, Vr = VRWM.
Preferred devices are Motorola recommended choices for future use and best overall value.
Ratings at 25°C ambient temperature unless otherwise specified.
60 Hz resistive or inductive loads.
For capacitive load, derate current by 20%.
Rev 2
©^RM^eo^cto^trⁱo^fil^ea,^rIn^Dc^e. 1^v9^ic96^{e Data}
1