S20S30CR Datasheet, PDF (1/2 Pages) Mospec Semiconductor – Schottky Barrier Rectifiers

MOSPEC
Switchmode Power Rectifiers
I² PAK surface Mount Power Package
The I² PAK Power rectifier employs the Schottky Barrier principle
with a Molybdenum barrier metal. These state-of-the-art devices have
the following features:
* Low Forward Voltage.
* Low Switching noise.
* High Current Capacity
* Guarantee Reverse Avalanche.
* Guard-Ring for Stress Protection.
* Low Power Loss & High efficiency.
* 150 Operating Junction Temperature
* Low Stored Charge Majority Carrier Conduction.
* Plastic Material used Carries Underwriters Laboratory
Flammability Classification 94V-O
S20S30CR Thru S20S60CR
SCHOTTKY BARRIER
RECTIFIERS
20 AMPERES
35-60 VOLTS
TO-262 (I²-PAK)
MAXIMUM RATINGS
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
S20S
Symbol
Unit
30CR 35CR 40CR 45CR 50CR 60CR
V_RRM
V_RWM 30 35 40 45 50 60
V
V_R
RMS Reverse Voltage
V_R(RMS) 21 25 28 32 35 42
V
Average Rectifier Forward Current
Total Device (Rated V_R),T_C=100
I_F(AV)
10
20
A
Peak Repetitive Forward Current
(Rate V_R, Square Wave, 20kHz)
I_FM
20
A
Non-Repetitive Peak Surge Current
(Surge applied at rate load conditions
I_FSM
200
A
half-wave, single phase, 60Hz)
Operating and Storage Junction
Temperature Range
T_J , T_STG
-65 to +150
ELECTRIAL CHARACTERISTICS
Characteristic
S20S
Symbol
Unit
30CR 35CR 40CR 45CR 50CR 60CR
Maximum Instantaneous Forward Voltage
( I_F =10 Amp T_C = 25 )
V_F
( I_F =10 Amp T_C = 125 )
0.55
0.48
0.65
V
0.57
Maximum Instantaneous Reverse Current
( Rated DC Voltage, T_C = 25 )
I_R
( Rated DC Voltage, T_C = 125 )
0.5
mA
30
DIM ^MILLIMETERS
MIN MAX
A
8.12 9.00
B
9.78 10.42
C
4.22 4.98
D 13.06 14.62
E
3.57 4.07
F
2.42 2.66
G 1.12 1.36
H
0.72 0.96
J
1.14 1.38
K
2.20 2.98
L
0.33 0.55
V
1.57 1.83
Common Cathode
Suffix “C”