RS801 Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SINGLE-PHASE SILICON BRIDGE RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes)

MOSPEC
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
8.0 Ampere
FEATURES
Low cost
High forward surge current capability
Ideal for printed circuit board
High temperature soldering guaranteed:
260^oc/10 second,0.375”(9.5mm)lead length
at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
Case: Transfer molded plastic
Epoxy: UL94V-O rate flame retardant
Terminals Lead Solderable Per MIL-STD-202
method 208C
Polarity Polarity symbols marked on case
Mounting :Thru hole for #6 screw, 5 in,-lbs.Torqute Max.
Weight 0.27 ounce, 7.59 gram
RS801 THRU RS807
MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS
* Rating at 25 ambient temperature unless otherwise specified
* Single phase,half wave. 60Hz, resistive or inductive load.
* For capacitive load derate current by 20 %
Characteristic
Symbol RS801 RS802 RS803 RS804 RS805 RS806 RS807
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
50
100 200 400 600 800 1000
V
V_DC
RMS Reverse Voltage
V_R(RMS) 35
Average Rectifier Forward ^TC=100
Current at
T_A=45 (Note 3)
Non-Repetitive Peak Surge Current
8.3 ms Single half sine-wave superimposed on
rated load
Forward Voltage (per element) ( I_F =8.0 Amp)
I_O(AV)
I_FSM
V_FM
Peak Reverse Current at rated
T_A = 25
DC blocking voltage per element _{TA = 100}
I_R
I² t Rating for Fusing( t<8.3ms)
I²t
Typical Junction Capacitance per element
(Note1)
C_J
Typical Thermal Resistance (per leg)(note 2)
Operating and Storage Temperature Range
R_{θ jc}
T_J , T_stg
70 140 280 420 560 700
V
8.0
A
6.0
150
A
1.0
10
1.0
93
105
5.0
-65 to +150
V
uA
mA
A²s
pF
o_C/W
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Unit mounted on 3.0”×3.0”×0.11” thick (7.5×7.5×0.3 cm ) Al. plate.
3. Unit mounted in free air, no heatsink, P.C.B. at 375”(9.5mm) lead length with. 5”×5”(12×12 mm) copper pads..