RS401 Datasheet, PDF (1/2 Pages) Leshan Radio Company – 4.0A BRIDGE RECTIFIERS

MOSPEC
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
4.0 Ampere
FEATURES
Low cost
High forward surge current capability
Ideal for printed circuit board
High temperature soldering guaranteed:
260^oc/10 second at 5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Transfer molded plastic
Epoxy: UL94V-O rate flame retardant
Terminals Lead Solderable Per MIL-STD-202E
method 208C
Polarity As Marking on Body
Mounting Position: Any
Weight 0.22 ounce, 6.21 gram
RS401 THRU RS407
MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS
* Rating at 25 ambient temperature unless otherwise specified
* Single phase, half wave. 60Hz, resistive or inductive load.
* For capacitive load derate current by 20 %
Characteristic
Symbol RS401 RS402 RS403 RS404 RS405 RS406 RS407
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
50
100 200 400 600 800 1000
V
V_R
RMS Reverse Voltage
V_R(RMS)
35
70 140 280 420 560 700
V
Average Forward Rectified ^TC^{=50 (Note 2)}
Output Current , at
T_A=50 (Note 3)
I_O(AV)
4.0
3.0
A
Non-Repetitive Peak Surge Current
8.3 ms Single half sine-wave superimposed on I_FSM
150
A
rated load ( JEDEC Method)
Forward Voltage (per element) ( I_F =4.0 Amp)
V_FM
1.0
V
Maximum DC reverse current at rated _{TA = 25}
DC blocking voltage per element
T_A = 100
I_R
Rating for Fusing( t<8.3 ms)
I²t
Typical Junction Capacitance per element (Note1) C_J
10
uA
1.0
mA
93
A²s
55
pF
Typical Thermal Resistance (note 3)
R_{θ jA}
20
k/W
Operating and Storage Temperature Range
T_J , T_stg
-65 to +150
Note: 1 Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Unit mounted on 3.0”×3.0”×0.11” thick (7.5×7.5×0.3 cm) AL, plate.
3. P.C. board mount with 0.5”×0.5”(12×12mm) copper pad. 0.375”(9.5 mm)lead length.