GBJ25005 Datasheet, PDF (1/2 Pages) Diodes Incorporated – 25A GLASS PASSIVATED BRIDGE RECTIFIER

MOSPEC
GBJ25005 THRU GBJ2510
GLASS PASSIVATED BRIDGE SINGLE PHASE
BRIDGE RECTIFIERS
VOLTAGE 50 to 1000 Volts
CURRENT 25 Amperes
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Glass passivated chip junction
* High case dielectric strength of 1500 V_RMS
* Ideal for printed circuit boards
* Low Reverse Leakage Current
* Surge Overload Rating to 350A Peak
MECHANICAL DATA
* Case: Molded plastic body
* Terminal: Plated leads solderable per
MIL-STD-202, Method 208
* Polarity: Molded on Body
* Mounting :Through Hole for #6 Screw
* Mounting Torque: 6 in-lbs max.
* Weight: 6.6g
* Marking:Type Number
MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS
* Rating at 25 ambient temperature unless otherwise specified
* Single phase,half wave. 60Hz, resistive or inductive load.
* For capacitive load derate current by 20 %
Characteristic
Symbo _{GBJ25005 GBJ2501 GBJ2502 GBJ2504 GBJ2506 GBJ2508 GBJ2510}
l
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
50
V_R
100 200 400 600 800 1000
Unit
V
RMS Reverse Voltage
V_R(RMS)
35
70 140 280 420 560 700
V
Average Rectifier Forward Current @ T_C=100
I₀₎
25
Non-Repetitive Peak Surge Current
8.3 ms Single half sine-wave superimposed on I_FSM
350
rated load (JEDEC Method)
Forward Voltage (per element) ( I_F =10 Amp)
V_FM
1.05
Peak Reverse Current
( Rated DC Voltage, T_C = 25 )
I_R
10
( Rated DC Voltage, T_C = 125 )
500
I² t Rating for Fusing( t<8.3 ms)
I²t
510
Typical Junction Capacitance per Element (note2) C_J
60
Maximum Thermal Resistance per leg(note 3)
R_{θ jc}
1.0
Operating and Storage Temperature Range
T_J , T_stg
-65 to +150
Note: NOTES:
1. Non-repetitive ,For 1>1ms and<8.3ms.
2. Measure at 1.0 Hz and applied reverse voltage of 4.0V DC.
3. Thermal resistance from junction to case per element,Unit mounted 220×220×1.6mm aluminmum plate heat sink.
A
A
V
uA
A²s
pF
o_C/W