E0503S-2WR2_15 Datasheet, PDF (5/5 Pages) MORNSUN Science& Technology Ltd. – DC/DC Converter

DC/DC Converter
E_S-2WR2 & F_S-2WR2 series
Dimensions and Recommended Layout
FrontView
Dual
THIRDANGLEPROJECTION
∅1.00[∅0.039]
12
567
0.50[0.020]
19.65[0.774]
BottomView
12
567
2.54[0.100]
15.24[0.600]
Note:
0.90[0.035]
Unit:mm[inch]
Pinsectiontolerances:±0.10[±0.004]
Generaltolerances:±0.25[±0.010]
Single
12
5
7
Note：Grid2.54*2.54mm
Pin-Out
Pin
Single
Dual
1
Vin
Vin
2
GND
GND
5
0V
-Vo
6
NoPin
0V
7
+Vo
+Vo
1100000204-B0
Notes:
1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing
bag number: 58200001;
2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all
parameters in the datasheet;
3. The maximum capacitive load offered were tested at nominal input voltage and full load;
4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25 ℃ , humidity<75% with nominal
input voltage and rated output load;
5. All index testing methods in this datasheet are based on our Company’s corporate standards;
6. The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model
products may exceed the requirements mentioned above. Please contact our technicians directly for specific information;
7. We can provide product customization service;
8. Specifications are subject to change without prior notice.
MORNSUN Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: [phone]-8801
Fax: [phone]
E-mail: [e-mail]
2015.04.17-A/2
Page 5 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation