QA2401C-20 Datasheet, PDF (4/4 Pages) MORNSUN Science& Technology Ltd. – Ultra low isolation capacitance

MOSFET SiC Driver Dedicated Power Supply
QA2401C-20
Dimensions and Recommended Layout
Notes:
1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58200013;
2. The lead connecting the power supply module and SiC driver should be as short as possible during use;
3. The output filtering capacitor should be as close as possible to the power supply module and SiC driver;
4. The peak of the MOSFET SiC driver dedicated power supply gate drive current is high, so low internal resistance electrolytic capacitor is
recommended to be used for the power supply module output filter capacitor;
5. The average output power of the driver must be lower than that of the power supply module;
6. Consider fixing with glue near the module if being used in vibration occasion;
7. The max. capacitive load should be tested within the input voltage range and under full load conditions;
8. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C, humidity<75% when inputting
nominal voltage and outputting rated load;
9. All index testing methods in this datasheet are based on our Company’s corporate standards;
10. The performance indexes of the product models listed in this manual are as above, please directly contact our technicians for specific
information;
11. We can provide product customization service;
12. Specifications of this product are subject to changes without prior notice.
MORNSUN Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: [phone]-8801
Fax: [phone]
E-mail: [e-mail]
2016.11.16-A/0
Page 4 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation