LO10-26D0512-04 Datasheet, PDF (4/4 Pages) MORNSUN Science& Technology Ltd. – AC-DC converter for electric meters

Figure 3:Recommended circuit for applications which require 4.4KV differential-mode inrush standard (half-wave rectification)
If higher EMC requirement ,please refer to figure 2.3, recommended parameters are shown in the table below.
Recommend Parameter For Higher EMC Standard Circuit
Components
Recommend Parameter
MOV
CX
LDM
S20K550
0.15µF
56µH
LCM
3mH
C1、C2
47µF/400VDC
R4、R5、R6、R7
560kΩ/1206
D
2A/1000V
R1、R2、R3
5Ω/5W
FUSE
3.15A/250V，slow blow, it must be connected to
FUSE
DIMENSIONS, RECOMMENDED FOOTPRINT&PACKAGING
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China.
Tel: [phone]
Fax:[phone]
E-mail: [e-mail]
Http://www.mornsun-power.com
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
LO10-26D0512-04 2013.04.26-A/1 Page 4 of 4