QA156D-24 Datasheet, PDF (3/3 Pages) MORNSUN Science& Technology Ltd. – Isolation voltage

DC/DC Converter for IGBT Driver
QA156D-24
Design Reference
1.Typical application
Control Signal
IGBT Driver
C1/ C2
100uF/35V (Low internal resistance capacitance)
Fig. 2
2.It is not allowed to connect modules output in parallel to enlarge the power
3.For more information please find DC-DC converter application notes on www.mornsun-power.com
Dimensions and Recommended Layout
Notes:
1. Packing information please refer to Product Packing Information . Packing bag number: 58210039;
2. The lead wire connecting the power supply module and IGBT driver should be as short as possible during use;
3. The input&output filtering capacitor should be as close as possible to the power supply module and IGBT driver;
4. The peak of the IGBT driver gate drive current is high, so low internal resistance electrolytic capacitor is recommended to be used for
the power supply module output filter capacitor;
5. The average output power of the driver must be lower than that of the power supply module;
6. The maximum capacitive load offered were tested at nominal input voltage and full load;
7. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75% with nominal
input voltage and rated output load;
8. All index testing methods in this datasheet are based on our Company’s corporate standards;
9. The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model
products may exceed the requirements mentioned above. Please contact our technicians directly for specific information;
10. We can provide product customization service;
11. Specifications are subject to change without prior notice.
MORNSUN Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: [phone]-8801
Fax: [phone]
E-mail: [e-mail]
2016.10.18-A/1
Page 3 of 3
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation