B0303S-D-W2 Datasheet, PDF (3/3 Pages) MORNSUN Science& Technology Ltd. – SINGLE OUTPUT DC-DC CONVERTER

OUTLINE DIMENSIONS & PIN CONNECTIONS
MECHANICAL DIMENSIONS
B_S-W2 Series
B_D- W2 Series
11.60[0.461] 0.90[0.035]
0.50[0.020]
1 234
(Bottom View)
12.70[0.500]
7.62[0.300]
1
4
7
5
5.08[0.200]
∅1.00 [∅0.039]
(Side View)
4.10[0.161]
7.62[0.300]
1.90[0.075]
0.50[0.020]
RECOMMENDED FOOTPRINT
B_S- W2 Series
7.62[0.300]
1 234
B_D-W2 Series
2.54[0.100] ^{∅1.00 [∅0.039]}
∅1.00 [∅0.039]
7
5
1
4
2.54[0.100]
TUBE DUTLINE DIMENSIONS
B_ S-W2 Series
B_D-W2 Series
9.40[0.370]
11.70[0.461]
FOOTPRINT DE TAILS
Pin
B_S-W2
1
GND
2
Vin
3
0V
4
+Vo
FOOTPRINT DETAILS
Pin
B_D-W2
1
GND
4
Vin
5
+Vo
7
0V
Note:
Unit:mm[inch]
Pin section tolerances:±0.10mm[±0.004inch]
General tolerances:±0.25mm[±0.010inch]
0.60[0.024]
4.70[0.185]
0.60[0.024]
5.30[0.209]
Note:
Unit :mm[inch]
General tolerances: ±0.50mm[±0.020inch]
L=530mm[20.866inch] Tube Quantity: 43pcs(B_S-W2) 40pcs(B_D-W2)
L=220mm[8.661inch] Tube Quantity: 17pcs(B_S-W2) 16pcs(B_D-W2)
Note:
1. Operation under minimum load will not damage the converter; However, they may not meet all specification listed.
2. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
3. In this datasheet, all the test methods of indications are based on corporate standards.
4. Only typical models listed, other models may be different, please contact our technical person for more details.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
B_S(D)-W2
A/4-2009
Page 3 of 3