B0303LS-1WR Datasheet, PDF (3/3 Pages) MORNSUN Science& Technology Ltd. – DUAL/SINGLE OUTPUT DC-DC CONVERTER

OUTLINE DIMENSIONS & PIN CONNECTIONS
MECHANICAL DIMENSIONS
19.50±0.50
[0.768 ±0.020]
(Front View)
12
4 56
0.6±0.10
[0.024 ±0.004]
7.62
[0.300]
12.70
[0.500]
(Bottom View)
2.13
[0.084]
(Side View)
RECOMMENDED FOOTPRINT
2.13
[0.084]
12.7
[0.500]
7.62
[0.300]
12
456
Note: grid 2.54*2.54mm.
∅1.00
[0.040]
TUBE OUTLINE DIMENSIONS
8.30[0.327]
17.50[0.689]
11.70[0.461]
F OOTPRINT DETAILS
PIN
Daul
Single
1
Vin
Vin
2
GND
GND
4
-Vo
0V
5
0V
No Pin
6
+Vo
+Vo
Note:
Uni t: mm[inch]
Pin section tole rances:± 0 .10mm[± 0.0 04inch]
Gen eral toleran ces:±0.25m m[ ±0.010 inch ]
5.00[0.197]
Note:
Unit : mm[inch]
General tole rances:±0 .50mm[ ±0.020inch]
L=530mm[20.866inch] Devices per tube quantity: 25pcs
L=220mm[8.661inch] Devices per tube quantity: 10pcs
Short tube inner package dimensions: 255*170*80mm
Short tube outer package dimensions
(with six inner package box): 375*280*270mm
Long tube inner package dimensions: 580*200*100mm
Long tube outer package dimensions
(with two inner package box): 600*215*220mm
Long tube outer package dimensions
(with three inner package box):600*215*325mm
Not e:
1. Operation under minimum load will not damage the converter; However, they may not meet all specification listed, and that will reduce the life of
product.
2. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
3. In this datasheet, all the test methods of indications are based on corporate standards.
4. Only typical models listed, other models may be different, please contact our technical person for more details.
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
A_S-1WR & B_LS-1WR A/4-2012 Page 3 of 3