URF_P-6WR3_15 Datasheet, PDF (2/5 Pages) MORNSUN Science& Technology Ltd. – DC/DC Converter

DC/DC Converter
URF_P-6WR3 Series
Starting Time
Input Filter
Hot Plug
Nominal input& constant resistance load
--
10
--
ms
Pi filter
Unavailable
Output Specifications
Item
Output Voltage Accuracy
Line Regulation
Load Regulation
Transient Recovery Time
Transient Response Deviation
Operating Conditions
Full load, the input voltage is from low voltage
to high voltage
5%-100% load
25% load step change
Min.
--
--
--
--
--
Typ.
±1
±0.2
±0.5
300
±3
Max.
±3
±0.5
±1
500
±5
Temperature Drift Coefficient
Full load
--
--
±0.03
Ripple&Noise*
20MHz bandwidth
--
85
120
Over-voltage Protection
110
--
160
Over-current Protection
Input voltage range
110
140
190
Short circuit Protection
Continuous, self-recovery
Note: * Ripple and noise tested with “parallel cable” method, please see DC-DC Converter Application Notes for specific operation methods.
Unit
%
μs
%
%/℃
mV p-p
%Vo
%Io
General Specifications
Item
Operating Conditions
Isolation Voltage
Input-output, with the test time of 1 minute and the
leak current lower than 1mA
Isolation Resistance
Input-output, insulation voltage 500VDC
Isolation Capacitance
Input-output, 100KHz/0.1V
Operating Temperature
Derating if the temperature is ≥71℃(see Fig. 1)
Storage Temperature
Storage Humidity
Non-condensing
Pin Welding Resistance
Temperature
Welding spot is 1.5mm away from the casing, 10
seconds
Vibration
Switching Frequency
PWM mode
MTBF
MIL-HDBK-217F@25℃
Min.
Typ.
Max.
Unit
3000
--
--
VDC
1000
--
--
MΩ
--
1000
--
pF
-40
--
85
℃
-55
--
125
5
--
95
%
--
--
300
10-55Hz, 10G, 30 Min. along X, Y and Z
--
300
--
KHz
1000
--
--
K hours
Physical Specifications
Casing Material
Package Dimensions
Weight
Cooling method
Plastic (UL94-V0)
31.60*20.30*10.20 mm
13.00g(Typ.)
Free air convection
EMC Specifications
CE
EMI
RE
ESD
RS
EFT
EMS
Surge
CS
Immunities of voltage dip,
drop and short interruption
CISPR22/EN55022 CLASS A (Bare component)/
CLASS B (see Fig.3-② for recommended circuit)
CISPR22/EN55022 CLASS A (Bare component)/
CLASS B (see Fig.3-② for recommended circuit)
IEC/EN61000-4-2 Contact ±4KV
IEC/EN61000-4-3 10V/m
IEC/EN61000-4-4 ±2KV (see Fig.3-① for recommended circuit)
IEC/EN61000-4-5 ±2KV (see Fig.3-①for recommended circuit)
IEC/EN61000-4-6 3 Vr.m.s
IEC/EN61000-4-29 0-70%
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
perf. Criteria A
perf. Criteria B
2015.04.20-A/1
Page 2 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation