URB1D05YMD-6WR3 Datasheet, PDF (2/7 Pages) MORNSUN Science& Technology Ltd. – Ultra wide input voltage range

DC/DC Converter
URB1D_YMD-6WR3 Series
Temperature Coefficient
Full load
--
±0.02
±0.03
%/℃
Ripple & Noise^①
20MHz bandwidth , 5%-100% load
--
50
100
mV p-p
Over-voltage Protection
110
--
160
%Vo
Over-current Protection
Input voltage range
120
--
210
%Io
Short circuit Protection
Continuous, self-recovery
Note: ① Ripple and noise tested with “parallel cable” method, please see DC-DC Converter Application Notes for specific operation methods. 0%-5% load
ripple&Noise is no more than 5%Vo.
General Specifications
Item
Insulation Voltage
Insulation Resistance
Operating Conditions
Min.
Typ.
Input-output, with the test time of 1 minute and
the leak current lower than 1mA.
2250
--
Input and output respectively on the shell, with
the test time of 1 minute and the leak current
1600
--
lower than 1mA.
Input-output, isoiation voltage 500VDC
1000
--
Max.
--
--
--
Unit
VDC
MΩ
Isolation Capacitance
Input-output, 100KHz/0.1V
--
1000
--
pF
Operating Temperature
see Fig.1
-40
--
+85
Storage Temperature
Pin Welding Resistance
Temperature
Storage Humidity
-55
Welding spot is 1.5mm away from the casing,
10 seconds.
--
--
+125
℃
--
+300
Non-condensing
5
--
95
%RH
Vibration
IEC61373 car body 1 B mold
Switching Frequency *
PWM Mode
--
300
--
KHz
MTBF
MIL-HDBK-217F@25℃
1000
--
--
K hours
* This series of products using reduced frequency technology, the switching frequency is test value of full load,When the load is reduced to below 50%, the
switching frequency decreases with decreasing load.
Physical Specifications
Casing Material
Dimensions
Weight
Cooling Methods
Aluminum alloy
Horizontal package( without heat sink)
Horizontal package( with heat sink)
A2S wiring package ( without heat sink)
A2S wiring package( with heat sink)
A4S rail package( without heat sink)
A4S rail package( with heat sink)
without heat sink
with heat sink
Horizontal package/A2S wiring package/A4S rail
pHaorcizkoangtael _{package/A2S wiring package/A4S rail}
package
25.40*25.40*11.70 mm
25.40*25.40*16.20 mm
76.00*31.50*21.20 mm
76.00*31.50*25.20 mm
76.00*31.50*25.80 mm
76.00*31.50*29.80 mm
15g/35g/54g(Typ.)
20g/40g/59g(Typ.)
Free air convection
EMC Specifications
EMI
CE
RE
ESD
RS
EFT
EMS
Surge
CS
CISPR22/EN55022
CISPR22/EN55022
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
EN50121-3-2
IEC/EN61000-4-6
CLASS B (see Fig.3 or Fig.4 for recommended circuit)
CLASS B (see Fig.3 or Fig.4 for recommended circuit)
Contact ±6KV/Air ±8KV
10V/m
±4KV(see Fig.3 or Fig.4 for recommended circuit)
line to line ±2KV (2Ω 0.5uF see Fig.3 for recommended circuit)
line to ground ±4KV (12Ω 0.5uF see Fig.3 for recommended circuit)
line to line ±1KV (42Ω 0.5uF see Fig.4 for recommended circuit)
10 Vr.m.s
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
perf. Criteria B
perf. Criteria A
2016.09.26-A/0
Page 2 of 7
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation