TE6650HN Datasheet, PDF (2/6 Pages) MORNSUN Science& Technology Ltd. – Two-terminal isolation

Isolated Transmitter
TExxxxHN Series
General Specifications
Item
Operating Conditions
Electric Isolation
Isolation voltage
Isolation Resistance
Operating Temperature
Transportation and Storage
Temperature
Max. Operating Temperature
for casing
Application Environment
testing for 1 minute, leakage current <1mA,
humidity <70%
500VDC
Ta=25℃
Min.
Typ.
Max.
Unit
Isolated between the signal input and the signal
output.
4
--
--
KVAC
100
--
--
MΩ
-40
--
+85
℃
-50
--
+105
℃
--
--
50
℃
The presence of dust, fierce vibration,impulsion and
corrosive gas may cause damage to the product.
Physical Specifications
Package
Weight
Cooling Method
DIP28
10.8g(typ.)
Free air convection
EMC Specifications
ESD
IEC/EN61000-4-2
RS
IEC/EN61000-4-3
EMS
EFT
IEC/EN61000-4-4
Surge
IEC/EN61000-4-5
CS
IEC/EN61000-4-6
Contact ±4KV
3V/m
Power port ±2KV (see Fig. 7- for recommended circuit)
Power port ±1KV（Line to Line） (see Fig. 7- for recommended circuit)
3 Vr.m.s
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
perf. Criteria A
Application Precautions
1. Please read the instructions carefully before use; contact our technical support if you have any problem.
2. Do not use the product in hazardous areas.
3. use DC power supply for the product and 220V AC power supply is prohibited.
4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment.
5. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25℃, humidity<75% when inputting
nominal voltage and outputting rated load;
After-sales service
1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility
of failure of internal module, please contact the local representative or our technical support.
2. The warranty period for the product is 3 years as calculated from the date of delivery. If any quality problem occurs under normal use
within the warranty period, the product can be repaired or changed for free.
Applied circuit
See Application Notes for Isolated Transmitter for details.
Design Reference
1. Typical application
1) Schematic diagram
Fig. 1
2016.03.24-A/0
Page 2 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation