H0503S-1W_15 Datasheet, PDF (2/5 Pages) MORNSUN Science& Technology Ltd. – FIXED INPUT, ISOLATED & UNREGULATED SINGLE / DUAL OUTPUT

INPUT SPECIFICATIONS
Item
Test Conditions
5VDC Input
Input Surge Voltage
(1 sec. max.)
12VDC Input
15VDC Input
24VDC Input
Input Filter
Min.
Typ.
Max.
-0.7
--
9
-0.7
--
18
-0.7
--
21
-0.7
--
30
Capacitor
Unit
VDC
OUTPUT SPECIFICATIONS
Item
Test Conditions
Min.
Output Voltage Accuracy
Line Regulation
For Vin change of ±1%
--
3.3VDC output
--
5VDC output
--
7.2&9VDC output
--
Load Regulation
10% to 100% load
12VDC output
--
15VDC output
--
24VDC output
--
Temperature coefficient
100% load
--
Ripple & Noise*
20MHz Bandwidth
Output Voltage ≤12VDC
--
Output Voltage :15VDC, 24VDC
--
Short Circuit Protection
Note:* Ripple and noise tested with “parallel cable” method. See detailed operation instructions at DC-DC Application Notes.
Typ.
Max.
Unit
See tolerance envelope curve
--
±1.2
--
15
--
12
--
8
--
%
7
--
6
--
5
--
--
±0.03
%/°C
100
--
mVp-p
150
--
Continuous, automatic recovery
COMMON SPECIFICATIONS
Item
Test Conditions
Isolation Voltage
Input-Output, tested for 1 minute and leakage current less than 1 mA
Isolation Resistance
Input-Output, test at 500VDC
Isolation Capacitance
Input-Output, 100KHz/0.1V
Switching Frequency
Full load, nominal input
MTBF
MIL-HDBK-217F@25℃
Case Material
Weight
Min.
6000
1000
--
--
3500
--
Typ.
Max.
--
--
--
--
10
--
50
--
--
--
Plastic (UL94-V0)
4.2
--
Unit
VDC
MΩ
pF
KHz
K hours
g
ENVIRONMENTAL SPECIFICATIONS
Item
Test Conditions
Storage Humidity
Non condensing
Operating Temperature Power derating (≥100℃, see Figure 2)
Storage Temperature
Temperature rise
Ta=25°C,100% Load
Lead Temperature
1.5mm from case for 10 seconds
Cooling
Min.
Typ.
Max.
Unit
--
--
95
%
-40
--
105
-55
--
125
°C
--
25
--
--
--
300
Free air convection
EMC SPECIFICATIONS
CE
EMI
RE
EMS
ESD
CISPR22/EN55022 CLASS B（Typical Recommended Circuit Refer to Figure1）
CISPR22/EN55022 CLASS B（Typical Recommended Circuit Refer to Figure1）
IEC/EN61000-4-2 Contact ±8KV perf. Criteria B
The copyright and authority for the interpretation of the products are reserved by MORNSUN
H_S-1W & G_S-1W
2015.04.27-B/4 Page 2 of 5