URB1D03LMD-10WR3 Datasheet, PDF (1/8 Pages) MORNSUN Science& Technology Ltd. – Enhanced isolation, isolation voltage

DC/DC Converter
URB1D_LMD-10WR3 Series
10W, ultra wide input isolated & regulated
single output DC-DC converter
FEATURES
 Ultra wide input voltage range (4:1)
 High efficiency up to 85%
 Enhanced isolation, isolation voltage: 2250VDC
 Operating temperature range: -40℃ to +85℃
 Input under-voltage Protection, Output short
circuit, over-current, over–voltage protection
 Low ripple & noise
 EMI meet EN50121-3-2 & CISPR22/EN55022 CLASS
A, without external components
 Meets requirements of railway standard
EN50155
 Meet the IEC60950, UL60950, EN60950 approval
 Reverse voltage protection available with
A2S(Chassis mounting) or A4S(35mm DIN-Rail
mounting)
 International standard pin-out
RoHS Patent Protection
URB1D_LMD-10WR3 series are isolated 10W DC-DC products with 4:1 input voltage .Their feature efficiency up to 85%, 2250VDC isolation with
enhanced isolation, operating temperature of -40 ℃to +85℃, Input Under-voltage Protection, Output short circuit, over-current,
over–voltage protection. Railway vehicle electronic equipment widely used in 72V, 96V and 110V.
Selection Guide
certification
Part No. ^①
Input Voltage (VDC)
Nominal
(Range)
Max.^②
Output
Output Voltage Output Current (mA)
(VDC)
(Max./Min.)
Efficiency ^③
(%, Min./Typ.)
@ Full Load
Max.
Capacitive
Load(µF)
URB1D03LMD-10WR3
3.3
2400/0
74/76
5400
URB1D05LMD-10WR3
5
--
URB1D12LMD-10WR3
110
(40-160)
170
12
URB1D15LMD-10WR3
15
2000/0
833/0
667/0
78/80
82/84
82/84
5400
470
330
URB1D24LMD-10WR3
24
417/0
83/85
100
Note:
①Series with suffix “H” are heat sink mounting; series with suffix “A2S” are chassis mounting，with suffix “A4S” are DIN-Rail mounting, for example
URB1D05LMD-10WHR3A2S is chassis mounting of with heat sink, URB1D05LMD-10WR3A4S is DIN-Rail mounting of without heat sink; If the application has a
higher requirement for heat dissipation, you can choose modules with heat sink;
②Absolute maximum rating without damage on the converter, but it isn't recommended;
③Efficiency is measured In nominal input voltage and rated output load;A2S (wiring) and A4S (rail) Model due to input reverse polarity protection, minimum
efficiency greater than Min.-2 is qualified.
Input Specifications
Item
Operating Conditions
Min.
Typ.
Max.
Unit
Input Current (full load / no-load) Nominal input voltage
3.3V output
Others
--
95/3
98/8
--
110/3
117/8
mA
Reflected Ripple Current
Nominal input voltage
--
25
--
Surge Voltage (1sec. max.)
Starting Voltage
Shutdown Voltage
Starting Time
Input Filter
-0.7
100% load
--
28
Nominal input voltage & constant resistance
load
--
--
180
--
40
33
--
10
--
Pi filter
VDC
ms
Hot Plug
Unavailable
2016.11.07-A/0
Page 1 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation