TR100PW-EX Datasheet, PDF (1/4 Pages) MORNSUN Science& Technology Ltd. – ISOLATION SAFETY Barrier

UL TRA-THIN PROGRAMMABLE
ABNORMAL DETECTION THERMAL
RESISTANCE ISOLATION SAFETY
BARRIER
——TRxxxPW-EX Series
FEATURES
●Three-port electrical isolation between input,
output and power supply
●12.5mm slim case
● High accuracy (0.1% F.S.)
● High linearity (0.1% F.S.)
● Low temperature drift(50PPM/°C)
● Low-power dissipation
● Good EMC performance
● miniUSB port communication
● Input / Output range programmable
● High reliability(MTBF>500,000 hours)
PART NUMBER SYSTEM
T R xxx P W-E X
Safety barrier mark
Slim case
Programmable
Serial Number
Channel configuratior
Thermal Resistance signal
Transducer type
PRODUCT TYPE
Output type
1 input 1 output
GENERAL DESCRIPTION
The signal generated by the two-wire or three-wire RTDs
in the hazardous area is picked up by this product, and
converted to the standard analogue current or voltage signal
which is isolated with hazardous field. While limiting the
energy of intrinsically safe end string into hazardous area, to
ensure that the system is intrinsically safe explosion-proof
performance. The product has a Mini USB interface, It can be
used for programming to configure the type and range of
input and output signals. An independent power supply is nee
ded for the product and the port of power supply, input and
output are isolated from each other. The thickness is 12.5mm.
Connection of field devices and the regions: 2-wire, 3-
wire thermal resistance amplifiter.zone 0,zone 1,zone 2;
IIA,IIB,IIC,T4~T6 hazardous area.
1 input 2 output
Current output
Voltage output
TR100PW-EX
TR140PW-EX
TR600PW-EX
TR640PW-EX
Loop output
TR102PW-EX
Input signal：programmable(2-wire system or 3-wire system input)
Signal Type
Range
Pt100
-200~+850℃
Cu50
-50~+150℃
Cu100
-50~+150℃
TR602PW-EX
The minimum range
50℃
50℃
50℃
Output signal:
Output type
Output signal
Current output
4~20mA / 0~20mA ( programmable)
Voltage output
0~5V / 0~10V / 1~5V / 2~10V ( programmable)
Note:
1. Customers need to choose the type of the input signal, output signal and range. We could also offer customer design for special input and output.
2. You can get the USB Adapter T-01 for the isolator from MORNSUN free of charge if you need.
ELECTRICAL CHARACTERISTICS
Power input
parameters
Input voltage
Power dissipation
Power protection
18~30VDC（Typical values 24VDC）
1 input 1output<1.5W 1 input 2 output <1.8W
Reverse polarity protection
Hazardous Area
Safe Area
View Product Model input signal
Load capacity
≤500Ω(Output current maximum)
≥1MΩ(Output voltage maximum)
≤（Ue－4）／0.02,20V≤Ue≤30V（Loop power supply）
The copyright and authority for the interpretation of the products are reserved by MORNSUN
TRxxxPW-EX 2013.11.23-A/0 Page 1 of 4