TM663D-S Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – mV-LEVEL SIGNAL AMPLIFIER

mV-LEVEL SIGNAL AMPLIFIER
DESCRIPTION
mV-level amplifier can receive the mV-voltage
signal input from the scene, and transmit a
standard output signal to the control room or DCS
through isolation. With characteristics of high
output accuracy, good linearity and low
temperature drift, it needs an independent power
supply, and three port Isolation among input,
output and power supply.
PRODUCT PROGRAM
Part Number Power Supply
TM663D/S
24V
TMS63D/S-24
24V
TM6S3AD-3
24V
Input
100mV
24mV
±100mV
Output
0-5V
0-5V
0-3V
Isolation Power
Output
None
Channels
1
None
1
None
1
Note: We could also offer customer design for special input and output.
FEATURES
● Three port Isolation(input, output, power supply)
● High accuracy (0.1% F.S.)
● High linearity (0.1% F.S.)
● Isolation voltage(3000VDC/60S)
● High frequency response
● Low temperature drift(35PPM/℃)
● Industry class(Operation temp.: -25℃ to 71℃)
● High reliability(MTBF＞500,000 hours)
ELECTRICAL CHARACTERISTICS
Power Supply
Data
Power Supply
Power Dissipation
Power Protection
(Nominal Power Supply)±5%
≤2W
Reverse protection
Input Data
Input Impedance
Overload
≥10 MΩ
≤15V
Output Data
Load
＞1KΩ（Vout=max）
≤500Ω（Iout=max）
MODEL SELECTION
TMXXXD
Package style
Power supply
Signal output
Signal input
mV Signal input
Isolation amplifier
TRANSMISSION CHARACTERISTICS
Offset
0.1%F.S.
Gain Error
0.1%F.S.
Temperature Drift 0.0035%F.S./℃(-25℃ to +71℃)
ISOLATION CHARACTERISTICS
Galvanic Isolation Three port Isolation(input, output, power supply)
Isolation Voltage 3KVDC(Tested for 1minute and 1mA max, humidity < 70%)
Insulation
Resistance
100MΩ ， 500VDC (Among signal input ,signal output and power
supply)
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
OTHER CHARACTERISTICS
Ambient
temperature
Operation temperature:-25℃ to +71℃
Transport and Storage temperature:-50℃ to +105℃
Package
DIP24/SOIC24
Weight
About 10g
Application
environment
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
Note:
1 .All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2 .See application circuits for more details.
MORNSUN reserves the copyright
Specifications subject to change without notice.
TMXXXD/S
A/0-2008
Page 1 of 2