TM2130AP Datasheet, PDF (1/3 Pages) MORNSUN Science& Technology Ltd. – Isolated Transmitter

Isolated Transmitter
TMxxxxAP Series
Active high precision isolated transmitter
mV-level positive and negative signal input & positive signal output
RoHS
FEATURES
l Three-terminal isolation (signal input, signal output,
power supply)
l High precision grade (0.1% F.S.)
l High linearity (0.1% F.S.)
l High isolation voltage(2.5kVDC/60s)
l Extremely low temperature drift (50PPM/°C)
l Industrial grade (range of operating temperature:
-25 to +71°C)
l High reliability (MTBF >500,000 hours)
The TMxxxxAP series isolation amplifier modules have a mV-level positive and negative signal input and positive signal output. These
modules, with a high efficiency micro-power source built-in, can provide power for signal processing circuit. In the three-wire and four-wire
transmitter applications, our products make customers’ design simple and helpfully improve the room-using ratio of PCB. Adopting
electromagnetism isolation technology, it is available to keep higher accuracy and extremely lower temperature drift than photocoupler
isolation. These modules have three-port isolation (input, output and power supply),and the isolation voltage between them is up to
2.5kVDC.
Selection Guide
Part No.
Power Supply input (VDC)
TM2130AP
24V
TM4130AP
24V
TM1630AP
24V
TM5630AP
24V
TM6660AP
5V
TM6S6AP-3
5V
TM7530AP
24V
TM6650AP
12V
TM6S50AP-3.3
12V
Notes: Customization products are available if required.
Input Signal
±20mV
±50mV
±10mV
±75mV
±100mV
±100mV
±200mV
±100mV
±100mV
Input Specifications
Item
Input Power
Supply
Input voltage
Input power
Power supply protection
Input signal
Input
Input impedance
Overload
Operating Conditions
@max. input signal
Output Signal
4~20mA
4~20mA
0~5V
0~5V
0~5V
0~3V
0~10V
0~5V
0~3.3V
Isolation Power
Output (VDC)
None
None
None
None
None
None
None
None
None
Value
(Nominal value of power supply input) ±5%
≤1W
Reverse polarity protection
See selection guide
≥10MΩ
10V
Output Specifications
Item
Output
Output signal
Load capacity
Transmission Specifications
Item
Zero Offset
Precision
Temperature Drift
Operating Conditions
Voltage output
Current output @20mA
Value
See selection guide
≥2KΩ
≤500Ω
Operating Conditions
Operating temperature range of -25 to +71°C
Value
0.1%F.S.
0.1%F.S.
0.005%F.S./℃
2014.03.18-A/1
Page 1 of 3
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation