T5150D-S Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – ACTIVE SIGNAL AMPLIFIER

ACTIVE SIGNAL AMPLIFIER Vin&Iout
T51/52/61/62_D/S
DESCRIPTION
The series is a high integration, high
efficiency polygonal – line active isolation
amplifier module, with anterior circuit voltage
signal input and posterior current signal output.
These modules are embed with a high
efficiency isolated micro-power source, which
can provide a electrics-feed for signal input. In
the two-wire three-wire and four-wire circuit
applications, our products largely predigest
customers’ design helpfully improve the using
room ratio of PCB .Adopting electromagnetism
isolation technology, it is available to keep high
accuracy and natural extremely low
temperature drift. The isolation voltage among
the input, output power supply and isolated
power output can up to 2.5KVDC.
FEATURES
● Three-port isolation（Among input, output and
power supply）
● High accuracy (0.1% F.S.)
● High linearity (0.1% F.S.)
● Isolation voltage(2500VDC/60S)
● High frequency response(15KHz)
● Extremely low temperature(35PPM/℃)
● Industry standard(Operating Temperature
Range:-25°C to 71°C)
● High reliability(MTBF＞500,000 hours)
MODEL SELECTION
TXXXXD
Package style
Isolation power output
Power supply
Output
Input
Isolation Amplifier
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
PRODUCT PROGRAM
Part
Num ber
Power Supply
T5150D/S
12V
Input
0-10V
Output
4-20mA
T5230D/S
24V
0-10V
0-20mA
T6130D/S
24V
0-5V
4-20mA
T6135D/S
24V
0-5V
4-20mA
T6230D/S
24V
0-5V
0-20mA
T6233D/S
24V
0-5V
0-20mA
T6235D/S
24V
0-5V
0-20mA
T6250D/S
12V
0-5V
0-20mA
T6253D/S
12V
0-5V
0-20mA
T6255D/S
12V
0-5V
0-20mA
Note: We could also offer customer design for special input and output.
Isolation
Power Output
Channels
NONE
1
NONE
1
NONE
1
12V
1
NONE
1
24V
1
12V
1
NONE
1
24V
1
12V
1
ELECTRICAL CHARACTERISTICS
Power Supply
Power Supply Data Power Dissipation
Power Protection
Isolation Power
Output Data
Output Voltage
Output Current
Input Signal
Input Data
Input Impedance
Overload
Output Data
Output Signal
Load
(Nominal Power Supply)±5%
≤2W
Reverse protection
(Nominal) ±10%
≤25m A
See above
≥10MΩ
≤30V
See above
≤500Ω（At output=20mA）
TRANSMISSION CHARACTERISTICS
Offset
0.1%F.S.
Gain Error
Temperature Drift
0.1%F.S.
0.0035%F.S./℃ (-25℃ to +71 ℃)
ISOLATION CHARACTERISTICS
Galvanic Isolation Three-port isolation（Among input, output and power supply）
Isolation Voltage
Insulation
Resist anc e
2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%)
1000MΩ, 500VDC (Among signal input, signal output and power
supply)
OTHER CHARACTERISTICS
Ambient
temperature
Operation temperature:-25℃ to +71℃
Transport and Storage temperature:-50℃ to +105℃
Package
DIP24/SOIC24
Weight
About 10g
The Environment
in use
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2. Only typical models listed, specifications of custom product may be different. Please contact our service
people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T51/52/61/62_D/S A/3-2008 Page 1 of 2