T5130AP Datasheet, PDF (1/3 Pages) MORNSUN Science& Technology Ltd. – Isolated Transmitter

Isolated Transmitter
TxxxxAP Series
Active high precision isolated transmitter
RoHS
FEATURES
z Four-port isolation(signal input, signal output, power
supply and Isolation power output)
z High accuracy (0.1% F.S.)
z High linearity (0.1% F.S.)
z Isolation voltage(2.5KVDC/60S)
z Extremely low temperature drift (35PPM/℃)
z Industry standard(Operating Temperature Range:
-25 ~ 71℃)
z High reliability(MTBF>500,000 hours)
The TxxxxAP series are a high integration and efficiency active isolation amplifier module, with positive and negative signal input & positive
signal output. These modules, with a high efficient isolated micro-power source built-in, can provide energy for inner signal processing
circuit and an isolation power out for front-end circuit. The product greatly simplifies the design of the user in the applications of three-wire
and four-wire, also it improves the using room ratio of PCB. Adopting electromagnetism isolation technology, it is available to keep higher
accuracy and extremely lower temperature drift more than opticalcoupler isolation. These modules have four-port isolation (input, output,
power supply and isolation power output).
Selection Guide
Part No.
Power Supply input (VDC)
Input Signal
T5130AP
24V
±10V
T5530AP
24V
±10V
T5533AP
24V
±10V
T5650AP
12V
±10V
T6130AP
24V
±5V
T6630AP
24V
±5V
T6633AP
24V
±5V
T6634AP
24V
±5V
Notes: We could also offer customer design for special input and output as follow:
Power supply:24/15/12VDC
Input signal: 0～±5V/±10V
Output signal: 0～5V/10V
Isolation power output: 24/15/12/5VDC.
Output Signal
4~20mA
0~10V
0~10V
0~5V
4~20mA
0~5V
0~5V
0~5V
Isolation Power
Output (VDC)
None
None
24V
None
None
None
24V
15V
Input Specifications
Item
Input Power
Supply
Input voltage
Input power
Power supply protection
Input signal
Input
Input impedance
Overload
Operating Conditions
Signal, power full load
in case of input of voltage signal
Value
(Nominal Power Supply) ±5%
≤2W
Reverse polarity protection
See selection guide
≥10MΩ
-15V<Vin<15V
Output Specifications
Item
Output of Isolated ^{Output voltage}
Power Supply
Output current
Output
Output signal
Load capacity
Operating Conditions
Power, current full load
Voltage output
Current output @ 20mA
Value
(Nominal value)±10%
≤25mA
See selection guide
≥2KΩ
≤500Ω
2014.03.23-B/1
Page 1 of 3
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation