T1530D-S Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – ACTIVE SIGNAL AMPLIFIER

ACTIVE SIGNAL AMPLIFIER Iin & Vout
T15/16/25/26_D/S
DESCRIPTION
The series is a high integration, high
efficiency polygonal - line active isolation
amplifier module, with anterior circuit current
signal input and posterior current signal output.
These modules are embed with a high
efficiency isolated micro-power source, which
can provide a electrics-feed for signal input. In
the two-wire three-wire and four-wire circuit
applications, our products largely predigest
customers’ design helpfully improve the using
room ratio of PCB. Adopting electromagnetism
isolation technology, it is available to keep high
accuracy and natural extremely low
temperature drift. The isolation voltage among
the input, output, power supply and isolated
power output can up to 2.5KVDC.
FEATURES
● Four-port isolation（Among input, output,
power supply and Isolation Power output）
● High accuracy (0.1% F.S.)
● High linearity (0.1% F.S.)
● Isolation voltage(2500VDC/60S)
● High frequency response(15KHz)
● Extremely low temperature(35PPM/℃)
● Industry standard(Operating Temperature
Range:-25°C to 71°C)
● High reliability(MTBF＞500,000 hours)
MODEL SELECTION
TXXXXD
Package style
Isolation power output
Power supply
Output
Input
Isolation Amplifier
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
PRODUCT PROGRAM
Part
Number
Power Supply
T1530D/S
24V
T1533D/S
24V
T1630D/S
24V
T1650D/S
12V
Input
4-20mA
4-20mA
4-20mA
4-20mA
Output
0-10V
0-10V
0-5V
0-5V
Isolation
Power Output
Channels
NONE
1
24V
1
NONE
1
NONE
1
Note: We could also offer customer design for special input and output.
ELECTRICAL CHARACTERISTICS
Power Supply
Power Supply ±5%
Power Supply Data Power Dissipation
≤2W
Isolation Power
Output Data
Power Protection
Output Voltage
Output Current
Reverse protection
(Nominal) ±10%
≤25mA
Input Data
Input Signal
Input Impedance
Overload
See above
Voltage Drop≤250mV(At input=20mA)
≤300mA
Output Data
Output Signal
Load
See above
＞1KΩ（At output=max）
TRANSMISSION CHARACTERISTICS
Offset
0.1%F.S.
Gain Error
0.1%F.S.
Temperature Drift 0.0035%F.S./℃ (-25℃ to +71 ℃)
ISOLATION CHARACTERISTICS
Galvanic Isolation
Four-port isolation（Among input, output, power supply and Isolation
Power output）
Isolation Voltage
2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%)
Insulation
Resist anc e
1000MΩ,500VDC (Among signal input ,signal output ,power supply
and isolation power output)
OTHER CHARACTERISTICS
Ambient
temperature
Operation temperature:-25℃ to +71℃
Transport and Storage temperature:-50℃ to +105℃
Package
DIP24/SOIC24
Weight
About 10g
The Environment
in use
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2. Only typical models listed, specifications of custom product may be different. Please contact our
service people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T15/16/25/26_D/S A/2-2008 Page 1 of 2