T1530B Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – Active Single channel Analog signal Isolation barrier

Active Single channel Analog signal
Isolation barrier (Iin & Vout)
T15/16/25/26_B
APPLICATIONS
Analog signal isolating barrier, is a signal
conditioner with electrical insulation between input
and output, which can receive the standard or
non-standard analog signal input from the scene,
and transmit a standard output signal to the control
room or DCS, to get three-port isolated among
power supply, input and output. It is designed for
translating signals of apparatus in hazardous area,
isolating and transforming these signals into
standard signals which can be accepted by
industry computer, DCS, PLC, or user-specified
special signals. It is widely used in the industrial
measurement systems, medical electronic
equipment, electrical equipment etc. We adopt
high efficiency magnetism and electricity isolated
technology to achieve signal isolation, with
characteristics of high output accuracy, good
linearity and low temperature drift.
FEATURES
● Three port Isolation(input, output, power supply)
● High accuracy (0.1% F.S.)
● High linearity (0.1% F.S.)
● Isolation voltage(2500VDC/60S)
● High frequency response(15KHz)
● Low temperature drift(35PPM/℃)
● Industry class(Operation temp.: -25℃ to +71℃)
● High reliability(MTBF＞500,000 hours)
MODEL SELECTION
TXXXXB
PRODUCT PROGRAM
Part
Number
Power Supply
Input
Output
Isolation
Power Output
T1530B
24V
4-20mA
0-10V
NONE
T1533B
24V
4-20mA
0-10V
24V
T1630B
24V
4-20mA
0-5V
NONE
T1650B
12V
4-20mA
0-5V
NONE
Note: We could also offer customer design for special input and output.
Channels
1
1
1
1
ELECTRICAL CHARACTERISTICS
Power Supply
Data
Power Supply
Power Dissipation
Power Protection
(Nominal Power Supply)±5%
≤2W
Reverse protection
Isolation Power
Output Data
Output Voltage
Output Current
(Nominal)±10%
≤25m A
Input Signal
See above
Input Data
Input Impedance
Input 20mA with voltage drop about 250mV
(At input=20mA)
Overload
≤300m A
Output Data
Output Signal
Load
See above
＞1KΩ(At Output=Max)
TRANSMISSION CHARACTERISTICS
Offset
0.1%F.S.
Gain Error
0.1%F.S.
Temperature Drift 0.0035%F.S./℃ (-25℃ to +71℃)
ISOLATION CHARACTERISTICS
Galvanic Isolation Three port Isolation(input, output, power supply)
Isolation Voltage
Insulation
Resistance
2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%)
100MΩ，500VDC(Among signal input ,signal output, power supply
and isolation power output)
Package style
Isolation power output
Power supply
Output
Input
Isolation amplifier
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
OTHER CHARACTERISTICS
Ambient
tem perature
Operation temperature:-25℃ to +71℃
Transport and Storage temperature:-50℃ to +105℃
Package
35mm DIN-rail package
Safety Class
IP20 (IEC60529 / EN60529)
EMC compliance GB/T 18268 (IEC61326-1)
Weight
About 60g
Application
envir onm ent
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output
load unless otherwise specified.
2. Only typical models listed, specifications of custom product may be different. Please contact our
service people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T15/16/25/26_B A/1-2008 Page 1 of 2