T1133D-S Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – ACTIVE SIGNAL AMPLIFIER

ACTIVE SIGNAL AMPLIFIER Iin &Iout
T11/12/21/22_D/S
DESCRIPTION
The series is a high integration, high
efficiency polygonal - line active isolation
amplifier module, with anterior circuit current
signal input and posterior current signal output.
These modules are embed with a high
efficiency isolated micro-power source, which
can provide a electrics-feed for signal input. In
the two-wire three-wire and four-wire circuit
applications, our products largely predigest
customers’ design helpfully improve the using
room ratio of PCB. Adopting electromagnetism
isolation technology, it is available to keep high
accuracy and natural extrem ely low
temperature drift. The isolation voltage among
the input, output, power supply and isolated
power output can up to 2.5KVDC.
FEATURES
● Four-port isolation（Among input, output,
power supply and Isolation Power output）
● High accuracy (0.1% F.S.)
● High linearity (0.1% F.S.)
● Isolation voltage(2500VDC/60S)
● High frequency response(15KHz)
● Extremely low temperature(35PPM/°C)
● Industry standard(Operating Temperature
Range:-25°C to 71°C)
● High reliability(MTBF＞500,000 hours)
PRODUCT PROGRAM
Part
Number
Power Supply
Input
Output
T1133D/S
24V
4-20mA
4-20mA
T1130D/S
24V
4-20mA
4-20mA
T1230D/S
24V
4-20mA
0-20mA
T2133D/S
24V
0-20mA
4-20mA
T2233D/S
24V
0-20mA
0-20mA
T2230D/S
24V
0-20mA
0-20mA
Note: We could also offer customer design for special input and output.
Isolation
Power Output
Channels
24V
1
NONE
1
NONE
1
24V
1
24V
1
NONE
1
ELECTRICAL CHARACTERISTICS
Power Supply
Power Supply Data Power consumption
Power Protection
Isolation Power
Output Data
Output Voltage
Output Current
Input Signal
Input Data
Input Impedance
Overload
Output Data
Output Signal
Load
(Nominal Power Supply) ±5%
≤2W
Reverse protection
(Nominal) ±10%
≤25mA
See above
Voltage Drop≤250mV(At input=20mA)
≤300mA
See above
≤500Ω（At output=20mA）
TRANSMISSION CHARACTERISTICS
Offset
0.1%F.S.
Gain Error
0.1%F.S.
Temperature Drift
0.0035%F.S./℃ (-25°C to +71 °C)
MODEL SELECTION
TXXXXD
Package style
Isolation power output
Power supply
Out put
Input
Isolation Amplifier
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
ISOLATION CHARACTERISTICS
Galvanic Isolation
Four-port isolation （ Among input, output, power supply and
Isolation Power output）
Isolation Voltage
2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%)
Insulation
Resist anc e
1000MΩ, 500VDC(Among signal input, signal output, power
supply and isolation power output)
OTHER CHARACTERISTICS
Ambient
temperature
Operation temperature:-25℃ to +71℃
Transport and Storage temperature:-50℃ to +105℃
Package
DIP24/SOIC24
Weight
About 10g
The Environment
in use
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2. Only typical models listed, specifications of custom product may be different. Please contact our
service people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T11/12/21/22_D/S A/2-2008 Page 1 of 2