T1133B Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – Active Single channel Analog signal Isolation barrier

Active Single channel Analog signal
Isolation barrier (Iin & Iout)
T11/12/21/22_B
APPL ICAT IONS
Analog signal isolating barrier, is a signal
conditioner with electrical insulation between
input and output, which can receive the standard
or non-standard analog signal input from the
scene, and transmit a standard output signal to
the control room or DCS, to get three-port
isolated among power supply, input and output. It
is designed for translating signals of apparatus in
hazardous area, isolating and transforming these
signals into standard signals which can be
accepted by industry computer, DCS, PLC, or
user-specified special signals. It is widely used in
the industrial measurement systems, medical
electronic equipment, electrical equipment etc.
We adopt high efficiency magnetism and
electricity isolated technology to achieve signal
isolation, with characteristics of high output
accuracy, good linearity and low temperature
drift.
FEATURES
● Three port Isolation(input, output, power supply)
● High accuracy (0.1% F.S.)
● High linearity (0.1% F.S.)
● Isolation voltage(2500VDC/60S)
● High frequency response(15KHz)
● Low temperature drift(35PPM/℃)
● Industry class(Operation temp.: -25℃ to +71℃)
● High reliability(MTBF＞500,000 hours)
MODEL SELECTION
TXXXXB
Package style
Isolation power output
Power supply
Output
Input
Isolation amplifier
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
PRODUCT PROGRAM
Part
Number
Power Supply
Input
Output
Isolation
Power Output
Channels
T1133B
24V
4-20mA
4-20mA
24V
1
T1130B
24V
4-20mA
4-20mA
NONE
1
T2233B
24V
0-20mA
0-20mA
24V
1
T2230B
24V
0-20mA
0-20mA
NONE
1
Note: We could also offer customer design for special input and output.
ELECTRICAL CHARACTERISTICS
Power Supply
Data
Power Supply
Power Dissipation
Power Protection
(Nominal Power Supply)±5%
≤2W
Reverse protection
Isolation Power
Output Data
Output Voltage
Output Current
(Nominal)±10%
≤25m A
Input Signal
See above
Input Data
Input Impedance Input 20mA with voltage drop about 250mV
Overload
≤300m A
Output Data
Output Signal
Load
See above
≤500Ω(At Output =20mA)
TRANSMISSION CHARACTERISTICS
Offset
0.1%F.S.
Gain Error
0.1%F.S.
Temperature Drift
0.0035%F.S./℃ (-25℃ to +71℃)
ISOLATION CHARACTERISTICS
Galvanic Isolation Three port Isolation(input, output, power supply)
Isolation Voltage
2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%)
Insulation
Resist anc e
100MΩ，500VDC(Among signal input ,signal output, power supply
and isolation power output)
OTHER CHARACTERISTICS
Ambient
tem perature
Operation temperature:-25℃ to +71℃
Transport and Storage temperature:-50℃ to +105℃
Package
35mm DIN-rail package
Safety Class
IP20(IEC60529 / EN60529)
EMC compliance
GB/T 18268(IEC61326-1)
Weight
About 60g
Application
environm ent
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
Note:
1 .All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output
load unless otherwise specified.
2. Only typical models listed, specifications of custom product may be different. Please contact our
service people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T11/12/21/22_B A/1-2008 Page 1 of 2