T1100L-F Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – PASSIVE LOOP-POWERED ISOLATION TRANSMITTER

PASSIVE LOOP-POWERED
FEATURES
l Loop-powered with Over-current Protection
ISOLATION TRANSMITTER
l Accuracy(0.1% F.S.)
Iin & Iout
l High linearity (0.3% F.S.)
l High isolation voltage(3KVDC/60s)
——T1100L-F ^{l Extremely low temperature drift(35PPM/°C)}
l High reliability(MTBF>500,000 hours)
PART NUMBER SYSTEM
T1100L-F
Loop powerd
Package
Isolation power output
Power input
Signal output
Signal input
Isolation amplifier
GENERAL DESCRIPTION
T1100L-F Isolation transmitter is a kind of two-wire loop-
powered isolation module. The output device could receive the
signal from input instrument also powered the input
instrument throughT1100L-F.Adopting unique electromagnetism
isolation design and high efficiency loop electric-larceny
technology independent power supply is not required for the
module, realizing 4~20mA standard signal isolation with high
ac-curacy it match to kinds of equipment mod-ule input
attachment (PLC/DCS act); Over-current Protection is designed
to protect the isolation module and the latter circuit; Besid-es,
the module have extremely low temper-ature drift(no more than
35PPM/℃ under -25℃~+71℃ ).The isolation voltage between
the input and output can be up to 3KVDC.
SELECTION GUIDE
Model
loop Power Supply
Voltage
Maximum loop Power
Supply Voltage*
Input
T1100L-F
10~30V
40V
4～20mA
Note: *Exceeding the maximum loop power supply voltage will damage the product.
Output
4～20mA
Channels
1
ELECTRICAL SPECIFICATIONS
Input Signal
Input
Input Over-voltage
Voltage Drop-out
Output Signal
Output
With Load Ability
Load Regulation
4～20mA
≤30mA（Over-current Protection）
Type: 5V(@input = 20mA)
4～20mA
RL≤（Us –5）/0.02
Us：loop power supply voltage
0.05%F.S./100Ω
TRANSMISSION SPECIFICATIONS
Zero Offset
0.3%F.S.
Gain Error
0.3%F.S.
Temperature drift coefficient
0.0035%F.S./°C(-25°C ~ +71°C)
ISOLATION SPECIFICATIONS
Galvanic Isolation
Two-port isolation (Between signal input and signal output)
Isolation Voltage
3KVDC(Tested for 1minute, leakage current<1mA,humidity<70%)
Insulation Resistance
100MΩ,500VDC (Between signal input and signal output)
OTHER CHARACTERISTICS
Ambient Temperature
Operation temperature:-25°C ~ +71°C
Transport and Storage temperature:-50°C ~ +105°C
Package
SIP12
Weight
Application Environment
8g,typ
No dust, fierce vibration, impulsion and corrosive gas
Package
SIP12
The copyright and authority for the interpretation of the products are reserved by MORNSUN
T1100L-F
2013.07.09-A/2
Page 1 of 2