PV15-29B05L Datasheet, PDF (1/4 Pages) MORNSUN Science& Technology Ltd. – Ultra wide input voltage range

DC/DC Converter
PV15-29BxxL Series
New energy 200-1500VDC over wide and over high
input voltage isolation converter
FEATURES
 Ultra wide input voltage range: 200 - 1500VDC
 Industrial grade operating temperature: -25℃to
+70℃
 4000VAC high isolation voltage
 High efficiency, Low ripple& noise
 Input under-voltage protection, against reverse
protection, Output short circuit, over-current,
RoHS
over–voltage protection
PV15-29BxxLseries -----is 200-1500VDC ultra wide input voltage regulated DC-DC converter, which has advantages such as high efficiency,
high reliability and high safety isolation. The series products are widely used in industries such as photovoltaic power generation and high
voltage frequency conversion, provide a stable operating voltage for the load device, Its multiple protection features can enhance the
safety performance of the module power supply and the load under abnormal working conditions.
Selection Guide
Part No.
PV15-29B05L
PV15-29B12L
PV15-29B15L
PV15-29B24L
Output Power
10W
15W
nominal Output Voltage and
Current(Vo/Io)
5V/2000mA
12V/1250mA
15V/1000mA
24V/625mA
Efficiency
(800VDC, %/Typ.)
70
76
77
79
Max. Capacitive Load(µF)
(Normal temperature full load)
6000
2000
1500
470
Input Specifications
Item
Input Voltage Range
Input current
Inrush current
Under-voltage protection
External input fuse
Hot Plug
Operating Conditions
200VDC
1500VDC
200VDC
1500VDC
Min.
Typ.
Max.
Unit
200
--
1500
VDC
--
--
130
mA
--
--
25
--
--
50
A
--
--
150
Under voltage protection range: 170~185VDC
Under voltage release range:180~195VDC
15A/1500VDC
Unavailable
Output Specifications
Item
Operating Conditions
Min.
Typ.
Max.
Unit
Output Voltage Accuracy
--
±2
--
Line Regulation
Full load
--
±1
--
%
Load Regulation
0%~100% load
--
±1
--
Ripple & Noise*
Temperature Drift Coefficient
20MHz bandwidth (peak-peak value)
--
150
300
mV
--
±0.02
--
%/℃
Short Circuit Protection
Continuous, self-recovery
Over-current Protection
5V Output
≥120%Io, self-recovery
≤8VDC
Over-voltage Protection
12/15V Output
24V Output
≤20VDC
≤30VDC
Min. Load
0
--
--
%
Delay Time**
200-1500VDC
--
--
2
s
Note: * Ripple and noise are measured by “parallel cable” method, please see AC-DC Converter Application Notes for specific operation.
**Delay Time test condition: Full input voltage range, full output load range (The cooling time between Input power-off and the next input Power-on is
bigger than 15s).
2016.07.25-A/0
Page 1 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation