LS03-05B05S-FPT Datasheet, PDF (1/4 Pages) MORNSUN Science& Technology Ltd. – HIGH VOLTAGE DC-DC(AC-DC) CONVERTER

LS03-05B05S-FPT
HIGH VOLTAGE DC-DC(AC-DC) CONVERTER
LS03-05B05S-FPT----- high efficiency green power modules with miniature packaging
provided by Mornsun. The features of this series are: wide input voltage, DC and AC all in
one, high efficiency, high reliability, low loss, safety isolation etc. They are widely used in
industrial, office and civil equipments, as well as applications where no special requirement
for EMC performance. For harsh EMC environment, this series of products must use the
refered application circuit.
RoHS
PRODUCT FEATURES
1. Wide input voltage:100 ~ 400VDC(85 ~ 264VAC)
2. Over temperature protection and short circuit protection
3. High efficiency, high density
4. Low loss, green power
5. Multiple models available
6. Industrial level specifications
SELECTION GUIDE
Model
LS03-05B05S-FPT
Power
2.5W
Output (Vo/Io)
5V/ 500m A
PART NUMBER SYSTEM
LS03-05B05S-FPT
Special Mark
Output Voltage
Output Style
Input Voltage
Isolation Voltage
Output Power
Package Style
Product Series
Ripple and Noise
50mV
Efficiency (%)(typ.)
70
INPUT SPECIFICATIONS
Item
Input voltage range
Input current
Test Conditions
DC Input
AC Input
230VAC
Min.
Typ.
Max.
Unit
100
--
400
V
85
--
264
--
--
40
mA
OUTPUT SPECIFICATIONS
Item
Test Conditions
Voltage set accuracy
85~264VAC
Input variation
Full Load
Load variation
10%~100% Load
Ripple& Noise
(20MHz Bandwidth) (p-p)
Short circuit protection
Over temperature protection
Min.
Typ.
Max.
Unit
--
±2
--
--
±0.5
--
%
--
±1
--
--
50
100
mV
Continuous, automatic resume
--
--
150
℃
COMMON SPECIFICATIONS
Item
Test Conditions
Min.
Typ.
Max.
Operating
-40
--
+85
Storage
-40
--
+105
Case temperature
--
--
+90
Hum idity
--
--
85
Temperature coefficient
--
0.02
--
Power derating
55℃～85℃
-40℃～-20℃
1.33
--
--
2
--
--
Switching frequency
--
100
--
I/O-isolation voltage
Input and Output Tested for 1 minute
2000
--
--
Weight
Case material
--
--
10
UL94V-0
Install
PCB
MTBF
>300,000h @25℃
Note: 1.External electrolytic capacitor are required to models, more details refer to typical applications;
2. Ripple and Noise measuring refer to “ripple and noise measure figure”;
3.All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified;
4.In this datasheet, all the test methods of indications are based on corporate standards.
Unit
℃
%RH
%/℃
KHz
VAC
g
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
LS03-05B05S-FPT 2013.04.28-A/0 Page 1 of 4