LI120-10B12 Datasheet, PDF (1/4 Pages) MORNSUN Science& Technology Ltd. – Wide input voltage range

AC/DC Converter
LI120 Series
120W, AC-DC converter
FEATURES
 Wide input voltage range:85~264VAC/100~370VDC
 Active PFC
 AC and DC dual-use(input from the same terminal)
 Low standby power consumption, high efficiency,
high isolation voltage up to 3K VAC
 Low ripple & noise
 Input under-voltage protection, output short circuit,
over-current, over–voltage, over-temperature
RoHS
protection
 Remote control
 UL60950, EN60950 approval
LI120 series ---- 120W converter offered by Mornsun. It features Cost-effective, standard rail mounting, energy efficient. It offers stability and
high noise immunity for industrial control equipment, machinery and other harsh environments of industrial equipment. The converter is
compact size, light weight, compact structure, standard rail (35mm) Installation and save a lot of space for customers.
Selection Guide
Certification
Part No.
--
UL/CE
--
LI120-10B12
LI120-10B24
LI120-10B48
Output Power
120W
120W
120W
Nominal Output Voltage
and Current(Vo/Io)
12V/10A
24V/5A
48V/2.5A
Efficiency
(230VAC, %/Typ.)
89
92
93
Max. Capacitive Load
(µF)
10000
4700
1700
Input Specifications
Item
Input Voltage Range
Input frequency
Input current
Inrush current
Power Factor
Input
under-voltage
pHroottPelcutgion
Start-up Voltage
Shutdown Voltage
Operating Conditions
AC input
DC input
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
AC input, Full load
Min.
Typ.
Max.
Unit
85
--
264
VAC
100
--
370
VDC
47
--
63
Hz
--
--
1.5
--
--
0.75
A
--
35
--
--
70
--
--
0.98
--
--
--
0.96
--
76
--
83
VAC
67
--
75
Unavailable
Output Specifications
Item
Output Voltage Accuracy
Line Regulation
Load Regulation
Output Ripple & Noise*
Temperature Drift Coefficient
Stand-by Power Consumption
Short Circuit Protection
Over-current Protection
Over-voltage Protection
Over-temperature Protection
Min. Load
Operating Conditions
Full load
20MHz bandwidth (peak-peak value)
Min.
Typ.
Max.
Unit
--
--
±1
--
--
±0.5
%
--
--
±1
--
--
100
mV
--
±0.03
--
%/°C
--
--
0.75
W
Continuous, self-recovery
110-150% Io, start protecting after 3 seconds,
self-recovery
Continuous automatic restart until the over-voltage
condition is removed
shut down the output voltage at over-temperature,
self-recovery
0
--
--
%
2016.07.06-A/3
Page 1 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation