LH15-10D0524-04 Datasheet, PDF (1/4 Pages) MORNSUN Science& Technology Ltd. – 15W, AC-DC CONVERTER

LH15-10D0524-04
15W, AC-DC CONVERTER
LH15-10D0524-04 ----is a compact size power converter offered by Mornsun for
PCB mount installation applications. It features universal input voltage, taking both
DC and AC input voltage, low power consumption, high efficiency, high reliability,
safer isolation. It offers good EMC performance, meets IEC61000, UL60950, and
IEC60950 standards, and widely used in industrial, office and civil applications.
RoHS
PRODUCT FEATURES
1. Universal Input :85 ~ 264VAC,50/60Hz
2. Regulated output, low ripple and noise
3. output short circuit protection, over-current protection and thermal protection
MODEL SELECTION
LH15-10D0524-04
Output current
4. UL94V-0; plastic case, meets
5. ClassⅠ ,safety grade
6. EMC and safety standard, meets
Output Style
Input Voltage
Isolation Voltage
7. Three years warranty
Package Style
Product Series
PRODUCT PROGRAM
Model
Package
Power
Output
(Vo1/Io1)
Output
(Vo2/Io2)
Ripple and Noise Efficiency(%)
(Typ)
(Typ.)
Standby Power
（Maximum）
LH15-10D0524-04 62X45X22.5mm 15W
5V/1000mA 24V/400mA
50m V
81
0.75W
Note :
1. Ripple and Noise were measured by the method of parallel lines;
2. Unless otherwise specified, all specifications above are measured at rated input voltage and rated output load, Ta=25℃, humidity < 75%;
3. All specifications stated in this datasheet are subject to the above listed models only. For specifications of non-standard models, please
contact our technical support team.
INPUT SPECIFICATIONS
Input voltage range
Input frequency
Input current
Inrush current
Leakage current
External input fuse(recommended)
85 ~ 264VAC, 120 ~ 370VDC
47 ~ 63Hz
110VAC
250mA , typ
110VAC
10A, typ
0.3mA RMS typ. 230VAC/50Hz
2A/250V
230VAC
140mA , typ
230VAC
20A, typ
slow blow
OUTPUT SPECIFICATIONS
Voltage set accuracy
Input variation
Load variation (10-100%)
Isolated and separated twin output (balanced
load)
Minimum load
Ripple & noise(p-p)
(main output)
Short circuit protection
Over current protection
Over output voltage protection
Maximum capacitive load (μF)
Isolated and separated twin output
（20MHz Bandwidth）
24VDC models
±2% (main output)
±0.5% (main output)
±1.5% (supplement output)
Vo1: ±3%
Vo2: ±5%
(main output)
(supplement output)
10% (main output)
50mV (Typ)
100mV (Max)
Continuous, and auto resume
≥110% IO
≤30VDC
10000μF (main output)
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
LH15-10D0524-04 A/1-2012 Page 1 of 4