LH05-10D0512-01K Datasheet, PDF (1/3 Pages) MORNSUN Science& Technology Ltd. – AC-DC CONVERTER

LH05-10D0512-01K
AC-DC CONVERTER
LH05-10D0512-01K is high efficiency green power modules with
Isolated and separated twin output provided by Mornsun. The features
of this series are: wide input voltage, DC and AC all in one, high
efficiency, high reliability, low loss, safety isolation etc. They are widely
used in industrial, office and civil equipments.
RoHS
PRODUCT FEATURES
1. Universal Input :85 ~ 264VAC,50/60Hz
2. AC and DC all in one (input from the same terminal)
3. Low-voltage shutdown
4. Low Ripple and Noise
5. Overload protection and short circuit protection
6. High efficiency, High power density
7. Low loss, green power
8. industrial level specifications
9. Three years warranty
MODEL SELECTION
LH05-10D0512-01K
Special Mark
2 nd Supplement Output Voltage
2nd Output Voltage
1st Output Voltage
Output Style
Input Voltage
Isolation Voltage
Rated Power
Package Style
Product Series
PRODUCT PROGRAM
Model
Package
LH05-10D0512-01K
48.5X 36X20.5m m
Output
Power
5W
Output Voltage
(Vo1/Io1)
5V/750mA
Output Voltage
(Vo2/Io2)
12V/100mA
Ripple and Noise
(Typ.)
50mV
Efficiency
(%)(Typ.)
71
Note :
1. Ripple and Noise were measured by the method of parallel lines;
2. Unless otherwise specified, all specifications above are measured at rated input voltage and rated output load, Ta=25℃, humidity < 75%;
3. All specifications stated in this datasheet are subject to the above listed models only. For specifications of non-standard models, please contact our technical
support team.
INPUT SPECIFICATIONS
Input voltage range
Input frequency
Low-voltage shutdown
Input current
Inrush current
External input fuse
(recommended)
85 - 264VAC, 120 -370VDC
47 - 63Hz
Low-voltage open point：
84±4Vac
Shutdown hysteresis：
≥8Vac
110VAC
70mA , typ.
230VAC
35mA , typ.
110VAC
10A, typ.
230VAC
20A, typ.
1A/250V slow blow
OUTPUT SPECIFICATIONS
Voltage set accuracy
Input variation
±2% (main output)
±0.5% (main output)
±1.5% Max. (supplement output)
Load variation (10-100%)
Vo1: ±3%
Isolated and separated twin output (balanced load) _{Vo2: ±5%}
(main output)
(supplement output)
Minimum load
Ripple & noise(p-p)
Short circuit protection
Over current protection
Isolated and separated twin output
20MHz Bandwidth
10% (main output)
≤100mV (main output)
Continuous, and auto resume
≥110% IO
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
LH05-10D0512-01K A/1-2012
Page 1 of 3