KRB2005MS-2W Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – WIDE INPUT NON-ISOLATED REGULATED SINGLE OUTPUT

KRB2005MS-2W
WIDE INPUT NON-ISOLATED
REGULATED SINGLE OUTPUT
FEATURES
● Efficiency up to 90%
● Wide input range (3:1)
● No need for heatsinks
● Short circuit protection,
thermal shutdown
● Low ripple and noise
PRODUCT PROGRAM
Part
Number
Input
Voltage
Range (V)
Output
Voltage (V) Current (mA)
Efficiency
(%)
Min.Vin
Max. Vin
KRB2005MS-2W
10-30
5.0
400
90
83
If Input voltage above 30V may cause permanent damage to the device.
APPLICATIONS
The KRB2005MS-2W is specially
designed for applications where a wide
range input voltage power supplies a non-
isolated from the input power supply in a
distributed power supply system on a circuit
board.
These products apply to:
1) Where the voltage of the input power
supply is wide range;
2) Where the regulation of the output
voltage and the output ripple noise are
demanding.
MODEL SELECTION
KRB2005MS-2W
Rated Power
Package Style
Output Voltage
Input Voltage
Product Series
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development
center, Science Ave., Guangzhou Science City,
Luogang district, Guangzhou,P.R.China.
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
OUTPUT SPECIFICATIONS
Characteristics
Output Voltage accuracy
Line regulation
Load regulation
conditions
At 100% Load
Vin=min. to max. at full load
10% to 100% load
Min Typ
±2
±0.2
±0.4
Max
±3
±0.4
±0.6
Units
%
Ripple & Noise
20MHZ bandwidth
25
35 mVp-p
Short Circuit Input Powert
0.7 1.8 W
Short circuit protection
Continuous, automatic recovery
Output Current
0
400 mA
Switching frequency
Dynamic Load Stability
100%<->10% load
280 330 380 KHz
±100 mV
Quiescent current
Vin=min. to max. at 0%l load
5
8
mA
Thermal Shutdown
Internal IC junction
150
o_C
Temperature coefficient
-40 ^oC ~+85 ^oC ambient
±0.02 %/°C
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless
otherwise specified.
2. Only typical models listed, all the test methods of indications are based on corporate standards. please
contact our technical person for more details.
COMMON SPECIFICATION
Operating Temperature Range
Operating CaseTemperature Rise
Storage Temperature Range
-40 ^oC ~+85^oC
35^oC (max)
-55 ^oC ~+125 ^oC
Cooling
Lead Temperature*
Storage Humidity Range
Free Air Convection
300 ^oC (max)
≤ 95%
Case Material
MTBF (+25 ^oC)
Plastic (UL94-V0)
2,000,000 hours
Package Weight
2.8g
*Lead Temperature 1.5mm from case for 10 seconds.
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
A/4-2012
Page 1 of 2