JY240816D-30W Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – UNREGULATED,TRIPLE OUTPUT DC-DC CONVERTER

JY240816D-30W
30W, FIXED INPUT, 15000VDC DUAL ISOLATED
& UNREGULATED,TRIPLE OUTPUT DC-DC
CONVERTER
FEATURES
● Operating Temperature: -40℃～+85℃
● 15000VDC Isolation Voltage
● No External Component Required
● Internal SMD construction
● RoHS Compliance
PRODUCT PROGRAM
Part
Number
Input
Volt age(VDC)
Nominal Range
JY240816D-30W 24 22.8~25.2
APPLICATIONS
RoHS
Output
Vo1/Vo2&Vo3
(VDC)
Io1/Io2&Io3 (mA)
Max
Min
Vo1:
6.5-9.5
Io1:1000 Io1:100
Vo2&Vo3:
±(14.0-18.5)
Io2&Io3: Io2&Io3:
±750
±75
Efficiency
(%)(Typ.)
88
The JY240816D-30W series are specially
designed for applications where two group of
ISOLATION SPECIFICATIONS
polar power supplies are isolated from the input Item
Test conditions
Min Typ Max Units
power supply in a distributed power supply
system on a circuit board.
Isolation voltage
(Vin/Vout)
Tested for 1 minute and 1 mA max
Input to Output
10000
VAC
These products apply to:
1) Where the voltage of the input power supply is
fixed (voltage variation ≤ ±5%);
2) Where isolation is necessary between input
Isolation voltage
(Vin/Vout)
Isolation voltage
(Vo1/Vo2&Vo3)
Tested for 1 minute and 1 mA max
Input to Output
Tested for 1 minute and 1 mA max
Output to Output
15000
3000
VDC
VDC
and output (isolation voltage ≤15000VDC);
3) Where the regulation of the output voltage and
OUTPUT SPECIFICATIONS
the output ripple noise are not demanding.
Item
Test conditions
Min. Typ. Max. Units
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power
device driving circuits.
Output power
Load regulation
3
10% to 100% load (8V output)
10% to 100% load (±16V output)
30
W
20
%
20
Temperature drift
100% full load
±0.03 %/℃
Ripple & Noise*
20MHz Bandwidth
100 200 mVp-p
MODEL SELECTION
JY240816D -30W
Rated Output Power
Package Style
2’nd Output Voltage
1’st Output Vol tage
Input Voltage
Product Series
Switching frequency
Full load, nominal input
200
kHz
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter section, application notes.
COMMON SPECIFICATIONS
Item
Test conditions
Storage humidity
Operating Temperature
Min Typ Max Units
20
95
%
-40
85
Storage Temperature
-55
Lead temperature
1.5mm from case for 10 seconds
100
℃
300
Temp. rise at full load
40
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development
center, Science Ave., Guangzhou Science City,
Luogang district, Guangzhou,P.R.China.
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
Short circuit protection*
15
S
Electrical fast transients 4000V
RF field susceptibility 27-300 MHz,3W/5cm
Voltage change rate＜20%
Cooling
Free air convection
Case material
Plastic (UL94-V0)
Weight
100
g
MTBF
100
K hours
*Short circuit input current is about 1000mA,if longer than 15 seconds, the temperature will be too
high and the module will damage.
The copyright and authority for the interpretation of the products are reserved by MORNSUN JY240816D-30W A/1-2012
Page 1 of 2