IF0505S-D-W75 Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – SINGLE OUTPUT MINIATURE SIP/DIP PACKAGE

IF_S-1W/ IF_D-1W Series
1W, FIXED INPUT ISOLATED & REGULATED
SINGLE OUTPUT MINIATURE SIP/DIP PACKAGE
multi-country patent protection RoHS
FEATURES
● SIP/DIP Package
● 3KVDC Isolation
● Temperature Range: -40°C to +85°C
● Industry Standard Pinout
● No Heat sink Required
● No External Component Required
● PCB Mounting
● RoHS Compliance
● Short Circuit Protection
APPLICATIONS
The IF_S(D)-1W Series are specially designed
for applications where a single power supply is
highly isolated from the input power supply in a
distributed power supply system on a circuit
board.
These products apply to:
1) Where the voltage of the input power supply
is fixed (voltage variation ≤±5%);
2) Where isolation is necessary between input
and output (isolation voltage ≤3000VDC);
3) Where the regulation of the output voltage
and the output ripple and noise are
dem anding.
PRODUCT PROGRAM
Part
Number
Input
Voltage (VDC)
Nominal Range
Output
Volt age
(VDC)
Current (mA)
Max
Min
IF0505S/D-W 75
5
150
15
IF0505S/D-1W
5
200
20
IF0509S/D-1W
5 4.75-5.25 9
111
12
IF0512S/D-1W
12
83
9
IF0515S/D-1W
15
67
7
IF1205S/D-W 75
5
150
15
IF1205S/D-1W
5
200
20
IF1209S/D-1W 12 11.4-12.6 9
111
12
IF1212S/D-1W
12
83
9
IF1215S/D-1W
15
67
7
IF2405S/D-W 75
5
150
15
IF2405S/D-1W
5
200
20
IF2409S/D-1W 24 22.8-25.2 9
111
12
IF2412S/D-1W
12
83
9
IF2415S/D-1W
15
67
7
Note: The IF_S(D)-W25 Series also available in our company.
Efficiency Package
(%, Typ) Style
68
SIP/DIP
66
SIP/DIP
70
SIP/DIP
72
SIP/DIP
73
SIP/DIP
68
SIP/DIP
67
SIP/DIP
71
SIP/DIP
73
SIP/DIP
74
SIP/DIP
68
SIP/DIP
67
SIP/DIP
72
SIP/DIP
73
SIP/DIP
74
SIP/DIP
ISOLATION SPECIFICATIONS
Item
Test condition
Isolation voltage
Tested for 1 minute
Isolation resistance
Test at 500VDC
Min Typ
3000
1000
Max Units
VDC
MΩ
MODEL SELECTION
Rated Power
Package Style
Output Voltage
Input Voltage
Product Series
MORNSUN Science& Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
OUTPUT SPECIFICATIONS
Item
Test condition
Min Typ Max Units
Output power
0.1
1
W
Line regulation
For Vin change of ±5%
±0.25
Load regulation
10% to 100% full load
±1
%
Output voltage accuracy 100% full load
±3
Temperature drift
100% full load
0.03 %/°C
Output ripple*
Output noise*
20MKHz bandwidth
20MKHz bandwidth
10
20
mVp-p
50 100
Switching frequency Full load, nominal input voltage
100
KHz
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of
Power Converter section, application notes.
Note:
1.All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2.See below recommended circuits for more details.
MORNSUN reserves the copyright
Specifications subject to change without notice.
IF_S(D)-1W A/0-2008
Page 1 of 2