IB0505XT-W75 Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – single OUTPUT, SMD DC-DC CONVERTER

IB_(X)T-1W Series
1W,FIXED INPUT, ISOLATED & REGULATED
single OUTPUT, SMD DC-DC CONVERTER
FEATURES
●Small Footprint
●Single Voltage Output
●SMD Package Style
●1KVDC Isolation
●No Heatsink Required
●Continuous Short circuit protection
●Internal SMD construction
●Temperature Range: -40°C to +85°C
●Industry Standard Pinout
●No External Component Required
●RoHS Compliance
PRODUCT PROGRAM
Part
Number
Input
Voltage (VDC)
Nominal
Range
I B0505(X)T-W 75
IB0512(X)T-1W
5
4.75-5.25
IB0515(X)T-1W
I B1205(X)T-W 75
IB1212(X)T-1W
12
11.4-12.6
IB1215(X)T-1W
multi-country patent protection RoHS
Voltage
(VDC)
5
12
15
5
12
15
Output
Current (mA)
Max
Min
150
15
83
9
67
7
150
15
83
9
67
7
Efficiency
(%, Typ.)
68
69
69
68
69
70
APPL ICAT IONS
The IB_(X)T-1W Series are specially
designed for applications where a group of
polar power supplies are isolated from the
input power supply in a distributed power
supply system on a circuit board.
These products apply to:
1) Where the voltage of the input power
supply is fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between
input and output (isolation voltage
≤1000VDC);
3) Where the regulation of the output
voltage and the output ripple noise are not
demanding.
MODEL SELECTION
IB0512(X)T-1W
R ated P o wer
P a ckage Style
O u t put V oltage
I np u t Vo ltage
P ro d uc t Ser ies
Note: 1. IB_XT-1W series designing;
2. IB_XT-1W series have no 3,6,8,9pin,for example IB0505XT-W75.
OUTPUT SPECIFICATIONS
Item
Test Conditions
Min Typ. Max Units
Output power
0.1
1
W
Line regulation
For Vin change of ±5%
±0.25
Load regulation
10% to 100% load
±1
%
Output voltage accuracy 100% full load
±3
Temperature drift
100% full load
0.03 %/°C
ripple*
Noise*
20MHz Bandwidth
20MHz Bandwidth
10
20
mVp-p
50
100
Switching frequency
Full load, nominal input
100
KHz
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter section, application notes.
MORNSUN Science& Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou
Industrial District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
ISOLATION SPECIFICATIONS
Item
Test Conditions
Min Typ. Max Units
Isolation voltage
Tested for 1 minute and 1mA max 1000
VDC
Isolation resistance
Test at 500VDC
1000
MΩ
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2. See below recommended circuits for more details.
MORNSUN reserves the copyright
Specifications subject to change without notice.
IB_(X)T-1W
A/1-2008
Page 1 of 2