H0505RN-2W Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – SINGLE OUTPUT DC-DC CONVERTER

H_RN-2W Series
2W, FIXED INPUT, ISOLATED & UNREGULATED
SINGLE OUTPUT DC-DC CONVERTER
multi-country patent protection RoHS
FEATURES
High Efficiency up to 80%
DIP Package
6KVDC Isolation
Temperature Range: -40°C to +85°C
Internal SMD Construction
No Heat sink Required
No External Component Required
Continuous short circuit protection
Industry Standard Pinout
RoHS Compliance
APPLICATIONS
The H_RN-2W Series are specially designed for
applications where a group of polar power supplies
are isolated from the input power supply in a
distributed power supply system on a circuit board.
These products apply to:
1) Where the voltage of the input power supply is
fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between input and
output (isolation voltage ≤6000VDC);
3) Where the regulation of the output voltage and
the output ripple noise are not demanding.
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power device
driving circuits.
MODEL SELECTION
H0505RN-2W
Rated Power
Package Style
Output Voltage
Input Voltage
Product Ser ies
MORNSUN Science& Technology co.,Ltd.
Address: 2th floor 6th building, Hangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax: [phone]
http://www.mornsun-power.com
PRODUCT PROGRAM
Part
Num ber
Input
Voltage (VDC)
Nominal Range
H0505RN-2W
H0512RN-2W *
5
4.5-5.5
H0515RN-2W
H1205RN-2W *
H1212RN-2W* 12 10.8-13.2
H1215RN-2W
H2405RN-2W *
H2412RN-2W* 24 21.6-26.4
H2415RN-2W *
*Designing.
Voltage
(VDC)
5
12
15
5
12
15
5
12
15
Output
Current (mA)
Max
Min
400
40
167
17
133
13
400
40
167
17
133
13
400
40
167
17
133
13
Efficiency
(%, Typ)
76
79
78
76
80
79
77
80
78
OUTPUT SPECIFICATIONS
Item
Test Conditions
Min Typ Max Units
Output power
0.2
2
W
Line regulation
For Vin change of 1%
±1.2
Load regulation
10% to 100% load (5V output)
10% to 100% load (12V output)
12.8 15
%
6.8 15
10% to 100% load (15V output)
6.3 15
Output voltage accuracy
See tolerance envelope graph
Temperature drift
100% full load
0.03 %/°C
Ripple & Noise*
20MHz Bandwidth
150 200 mVp-p
Switching frequency Full load, nominal input
50
KHz
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter. Section, application notes.
COMMON SPECIFICATION
Item
Test Conditions
Min Typ Max Units
Storage humidity
95
%
Operating temperature
-40
85
Storage temperature
Temp. rise at full load
-55
125
°C
15
25
Lead temperature
1.5mm from case for 10 seconds
300
Cooling
Free air convection
Case material
Plastic(UL94-V0)
Short circuit protection
Continuous, automatic recovery
MTBF
3500
K hours
Weight
3.8
g
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
H_RN-2W
A/0-2009
Page 1 of 2