FT-AX1D Datasheet, PDF (1/4 Pages) MORNSUN Science& Technology Ltd. – EFT Suppresser

EFT Suppresser
FT-A/BX1D Series
EFT Suppresser
FEATURES
z Compact size
z Design to suppress the DC power interference
z The attenuation coefficient of frequency meet
30dB
z Cost-effective
z Low Temperature rise
z Mounting: PCB mounting, chassis mounting with
screw terminals, DIN-Rail mounting
RoHS
Apply to analog circuit which is noise-sensitive. FT-A/BX1D put on to the input of DC/DC module can substantially improve the EMS
performance of the module, FT-A/BX1D put on to the output of DC/DC module can substantially reduce the ripple and noise of the module.
FT-A/BX1D used with the MORNSUN DC/DC module, DC/DC module’s max. Input voltage must less than FT-A/BX1D’s max. Voltage, DC/DC
module’s max. Input current must less than FT-A/BX1D’s nominal current.
Selection Guide
Model
Input Voltage Range (VDC)
FT-AX1D
0~40
FT-BX1D
0~80
Note: series with suffix “A2S” are chassis mounting, with suffix “A4S” are DIN-Rail mounting, for example FT-AX1DA4S.
Nominal Current (A)(max)
1.5
1.5
General Specifications
Item
Test Conditions
Operating Temperature
Storage Temperature
Casing Temperature Rise
Nominal Current
D·C·R
Min.
Typ.
Max.
Unit
-40
--
85
-55
--
125
℃
--
15
--
--
160
--
mΩ
General Specifications
Casing Material
Black flame-retardant heat-proof epoxy resin (UL94-V0)
Horizontal package
Package Dimensions
A2S wiring package
A4S rail package
Weight
Horizontal package/A2S wiring package/A4S rail package
EFT Suppresser Specifications
Item
Test Conditions
Min.
Attenuation multiples
2.5KHz/5KHz/100KHz/1MHz
30
33.70x22.20x18.00 mm
76.00x31.50x26.80 mm
76.00x31.50x31.40 mm
20g/40g/60g(Typ)
Typ.
Max.
Unit
--
--
dB
Devise Standard
FT-A/BX1D can ensure MORNSUN DC/DC converter module meet EFT level of IEC/EN61000-4-4 ±4KV.
2014.02.18-A/2
Page 1 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation