FS-TD01D Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – EMC lightning surge protector

EMC lightning surge protector
FS-TD01D
485-AB bus Surge Protection Module
FEATURES
z Compact size (19.50*12.50*9.80mm)
z Suppress signal port lightning surge
z Cost-effective
z Impact anti - current: ≤1KA (8/20μs Simulated
lightning waveforms)
z Meet surge level of IEC/EN61000-4-5
485-AB bus surge protection module is based on the IEC61000-4-5 standard design, using multi-level protection circuit, selection of surge
protection devices, fast response, low output residual voltage, excellent transmission performance. Interface uses standard industrial
terminal block, convenient to use, apply to Lightning Protection of RS-485 communications.
Products use plastic shell, good sealing, with dust, anti-corrosion function, connected in series installed, inhibiting high voltage pulses on the
line, Protect back-end equipment from lightning and industrial surge damage.
Selection Guide
Part No.
Operating Voltage(VDC)
FS-TD01D
0-5
Notes: Customization products are available if required.
Clamping Voltage(VDC)
15
Nominal Current (A)
≤0.1
Transmission rate(bps)
≤115200
General Specifications
Item
Operating Temperature
Transportation and Storage Temperature
Storage Humidity
Casing Temperature Rise
Operating Conditions
Ta=25℃
Application Environment
D·C·R
Value
-40~+85℃
-40~+90℃
5-95%
15℃(Typ.)
The presence of dust, fierce vibration, impulsion and
corrosive gas may cause damage to the product
12x2Ω
Physical Specifications
Casing Material
Package
Weight
Cooling Method
Black flame-retardant heat-proof epoxy resin (UL94-V0)
DIP6
4.5g(Typ.)
Natural cooling
Surge Specifications
Impact anti - current
≤1KA (8/20μs Simulated lightning waveforms)
Design standards
FS-TD01D can ensure MORNSUN module meet surge level of IEC/EN61000-4-5 ± 2KV (2Ω resistance) and ± 4KV (12Ω resistance).
Application Precautions
1. Please read the instructions carefully before use; contact our technical support if you have any problem.
2. Do not use the product in hazardous areas.
3. Products supporting the communication interface modules.
4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment.
After-sales service
1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility
of failure of internal module, please contact the local representative or our technical support.
2. The warranty period for the product is 3 years as calculated from the date of delivery. If any quality problem occurs under normal use
within the warranty period, the product can be repaired or changed for free.
2014.04.16-A/0
Page 1 of 2
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation