English
Language : 

F0505XD-1W Datasheet, PDF (1/3 Pages) MORNSUN Science& Technology Ltd. – DUAL/SINGLE OUTPUT DC-DC CONVERTER
E_XD-1W & F_XD-1W Series
1W,FIXED INPUT,3000V ISOLATED & UNREGULATED
DUAL/SINGLE OUTPUT DC-DC CONVERTER
RoHS
FEATURES
● DIP package
● 3KVDC isolation
● Temperature range: -40°C ~ +85°C
● No heat sink required
● No external component required
● Internal SMD construction
● Industry standard pinout
● RoHS Compliance
● Compatible with “DCP01” series
PRODUCT PROGRAM
Part
Number
Input
Voltage (VDC)
Nominal Range
F0505XD-1W
5
E0512XD-1W
4.5-5.5
F2405XD-1W
24
21.6-26.4
Volt age
(VDC)
5
±12
5
Output
Current (mA)
Max.
Min.
200
20
±42
±4
200
20
Efficiency
(%, Typ.)
77
76
75
APPLICATIONS
The E_XD-1W & F_XD-1W series are
specially designed for applications where a
group of polar power supplies are isolated from
the input power supply in a distributed power
supply system on a circuit board.
These products apply to:
1) Where the voltage of the input power supply
is fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤3000VDC);
3) Where the regulation of the output voltage
and the output ripple noise are not
dem anding.
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power
device driving circuits.
MODEL SELECTION
F0505XD-1W
Rated Power
Package Style
Output Voltage
Input Voltage
Product Series
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development
center, Science Ave., Guangzhou Science City,
Luogang district, Guangzhou,P.R.China.
Tel: 86-20-38601850
Fax:86-20-38601272
Http://www.mornsun-power.com
Note:
1.Models listed with strike-through text have been officially discontinued.
COMMON SPECIFICATIONS
Item
Test Conditions
Min. Typ. Max. Units
Storage humidity range
95 %
Operating temperature
-40
85
Storage temperature
Temp. rise at full load
-55
125
°C
15 25
Lead temperature
1.5mm from case for 10 seconds
300
Short circuit protection*
Continuous
Cooling
Free air convection
Case material
Plastic(UL94-V0)
MTBF
3500
k hours
Weight
2.4
g
ISOLATION SPECIFICATIONS
Item
Test conditions
Min. Typ. Max. Units
Isolation voltage
Tested for 1 minute and 1mA max 3000
VDC
Isolation resistance Test at 500VDC
1000
MΩ
Isolation capacitance
7
pF
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
E_XD-1W & F_XD-1W A/2-2012 Page 1 of 3