D030505M-1W Datasheet, PDF (1/3 Pages) MORNSUN Science& Technology Ltd. – TWIN OUTPUT DC-DC CONVERTER

D_M-1W Series
1W,FIXED INPUT,1000V ISOLATED & UNREGULATED
TWIN OUTPUT DC-DC CONVERTER
multi-country patent protection RoHS
FEATURES
● Small footprint
● SIP package
● Temperature range: -40°C~+85°C
● 1KVDC isolation
● No Heat sink required
● No external component required
● Internal SMD Construction
● Industry standard pinout
● RoHS Compliance
PRODUCT PROGRAM
Part
Num ber
Input
Voltage (VDC)
Nominal Range
D030505M-1W
3.3
2.97-3.63
D050303M-1W
5
4.5-5.5
D050505M-1W
Voltage
(VDC)
5
3.3
5
Output
Current (mA)
Max.
Min.
100
10
100
10
100
10
Efficiency
(%, Typ)
70
62
71
APPLICATIONS
The D_M-1W Series are specially designed
for applications where a group of polar power
supplies are isolated from the input power
supply in a distributed power supply system on
a circuit board.
These products apply to:
1) Where the voltage of the input power supply
is fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤1000VDC);
3) Where the regulation of the output voltage
and the output ripple noise are not
demanding.
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power
device driving circuits.
MODEL SELECTION
D050505M -1W
Rated Power
Product Series
The 2nd Output Voltage
The 1st Output Voltage
Input Voltage
Package Style
MORNSUN Science& Technology co.,Ltd.
Address: 2th floor 6th building, Hangzhou
Industrial District, Guangzhou, China
Tel: [phone]
Fax: [phone]
http://www.mornsun-power.com
COMMON SPECIFICATIONS
Item
Test Conditions
Min. Typ. Max. Units
Storage humidity range
95
%
Operating temperature
-40
85
Storage temperature
Lead temperature
-55
1.5mm from case for 10 seconds
125
℃
300
Temp. rise at full load
15 25
Short circuit protection*
1
S
Cooling
Free air convection
Case material
Plastic(UL94-V0)
MTBF
1.4
g
Weight
3500
K hours
*Supply voltage must be discontinued at the end of short circuit duration.
ISOLATION SPECIFICATIONS
Item
Test Conditions
Min. Typ. Max. Units
Isolation voltage (Vin/Vout)
Isolation voltage (Vo1/Vo2)
Tested for 1 minute and 1mA max 1000
Tested for 1 minute and 1mA max 1000
VDC
Isolation resistance (Vin/Vout) Test at 500VDC
Isolation resistance (Vo1/Vo2) Test at 500VDC
1000
MΩ
1000
Isolation capacitance(Vin/Vout)
Isolation capacitance(Vo1/Vo2)
30
pF
30
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
D_M-1W
A/0-2009
Page 1 of 2