B0303 Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – SINGLE OUTPUT, SMD DC-DC CONVERTER

B_(X)T-1W Series
1W,FIXED INPUT, ISOLATED & UNREGULATED
SINGLE OUTPUT, SMD DC-DC CONVERTER
multi-country patent protection RoHS
FEATURES
SMD Package Style
Industry Standard Pinout
No Heat sink Required
1KVDC Isolation
High Power Density
Internal SMD construction
Temperature Range: -40°C to +85°C
No External Component Required
RoHS Compliance
APPLICATIONS
The B_(X)T-1W Series are specially designed
for applications where a group of polar power
supplies are isolated from the input power supply
in a distributed power supply system on a circuit
board.
These products apply to:
1) Where the voltage of the input power
supply is fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between
input and output (isolation voltage
≤1000VDC);
3) Where the regulation of the output voltage
and the output ripple noise are not
demanding.
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power
device driving circuits.
MODEL SELECTION
B0505( X)T-1W
Ra ted Power
Pac ka ge Style
Ou t put Voltage
Inp ut Voltage
Pro duct Series
MORNSUN Science& Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
PRODUCT PROGRAM
Part
Number
Input
Voltage (VDC)
Nominal Range
Voltage
(VDC)
Output
Current (mA)
Max
Min
B0303(X)T-1W
3.3
303
30
3.3 3.0-3.6
B0305(X)T-1W
5
200
20
B0503(X)T-1W
3.3
303
30
B0505(X)T-1W
5
200
20
B0509(X)T-1W 5
4.5-5.5
9
111
12
B0512(X)T-1W
12
84
9
B0515(X)T-1W
15
67
7
B1205(X)T-1W
5
200
20
B1209(X)T-1W
9
111
12
12 10.8-13.2
B1212(X)T-1W
12
84
9
B1215(X)T-1W
15
67
7
B2403(X)T-1W
3.3
300
30
B2405(X)T-1W
5
200
20
B2409(X)T-1W
9
110
11
24 21.6-26.4
B2412(X)T-1W
12
83
8
B2415(X)T-1W
15
67
7
B2424(X)T-1W
24
42
4
Note: 1.the B_XT-1W series have no 3,6,7 pin. For example B0505XT-1W.
2. B_XT-1W series : UL-60950-1 pending.
Efficiency
(%, Typ.)
UL CE
73
UL
74
UL
72
77
UL，CE
76
UL，CE
79
UL，CE
78
UL，CE
69
UL，CE
73
UL，CE
73
UL，CE
74
UL，CE
69
70
72
75
76
77
ISOLATION SPECIFICATIONS
Item
Test Conditions
Min Typ. Max Units
Isolation voltage
Tested for 1 minute and 1mA max 1000
VDC
Isolation resistance
Test at 500VDC
1000
MΩ
OUTPUT SPECIFICATIONS
Item
Test Conditions
Min Typ. Max Units
Output power
Line regulation
0.1
For Vin change of 1%(3.3V output)
For Vin change of 1%(Others output)
1
W
±1.5
±1.2
10% to 100% load (3.3V output)
15
20
Load regulation
10% to 100% load (5V output)
10% to 100% load (9V output)
10% to 100% load (12V output)
12.8
15
%
8.3
10
6.8
10
10% to 100% load (15V output)
6.3
10
10% to 100% load (24V output)
5
10
Output voltage accuracy
See tolerance envelope graph
Temperature drift
100% full load
0.03 %/°C
Output ripple &Noise* 20MHz Bandwidth
50
100 mVp-p
Switching frequency
Full load, nominal input(5/12V)
Full load, nominal input(24V)
100
KHz
500
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter section, application notes.
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless
otherwise specified.
2. See below recommended circuits for more details.
MORNSUN reserves the copyright
Specifications subject to change without notice.
B_(X)T-1W
A/2-2008
Page 1 of 2