A0503XT-W2 Datasheet, PDF (1/2 Pages) MORNSUN Science& Technology Ltd. – DUAL OUTPUT, SMD DC-DC CONVERTER

A_(X)T-W2 Series
0.25W,FIXED INPUT, ISOLATED & UNREGULATED
DUAL OUTPUT, SMD DC-DC CONVERTER
FEATURES
Small footprint
SMD Package Style
No Heat sink Required
1KVDC Isolation
Temperature Range: -40°C to +85°C
Internal SMD construction
No External Component Required
Industry Standard Pinout
RoHS Compliance
APPLICATIONS
The A_(X)T-W2 Series are specially designed
for applications where a group of polar power
supplies are isolated from the input power supply
in a distributed power supply system on a circuit
board.
These products apply to:
1) Where the voltage of the input power supply is
fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤1000VDC);
3) Where the regulation of the output voltage and
the output ripple noise are not demanding.
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power device
driving circuits.
MODEL SELECTION
A0505(X)T-W2
Rated Power
Package Style
Output Voltage
Input Voltage
Product Series
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
multi-country patent protection RoHS
PRODUCT PROGRAM
Part
Number
A0503(X)T-W 2
A0505(X)T-W 2
Input
Voltage (VDC)
Nominal Range
Voltage
(VDC)
±3.3
±5
Output
Current (mA)
Max
Min
±38
±4
±25
±3
A0509(X)T-W 2
5
4.5-5.5
±9
A0512(X)T-W 2
±12
±14
±2
±11
±2
A0515(X)T-W 2
A1205(X)T-W 2
±15
±9
±1
±5
±25
±3
A1209(X)T-W 2
±9
12
10.8-13.2
A1212(X)T-W 2
±12
A1215(X)T-W 2
±15
A2405(X)T-W 2
±5
A2409(X)T-W 2
±9
24
21.6-26.4
A2412(X)T-W 2
±12
A2415(X)T-W 2
±15
±14
±2
±11
±2
±9
±1
±25
±3
±14
±2
±11
±2
±9
±1
Note: The A_XT-W2 series have no 3,6,8,9 pin. For example A0505XT-W2.
Efficiency
(%, Typ.)
62
64
65
67
66
65
64
63
64
61
62
63
65
ISOLATION SPECIFICATIONS
Item
Test Conditions
Isolation voltage
Tested for 1 minute and 1mA max
Isolation resistance
Test at 500VDC
Min Typ. Max Units
1000
1000
VDC
MΩ
OUTPUT SPECIFICATIONS
Item
Test Conditions
Min Typ. Max Units
Output power
Line regulation
For Vin change of 1%(3.3V output)
For Vin change of 1%(Others output)
0.25 W
±1.5
±1.2
10% to 100% load (3.3V output)
15
20
10% to 100% load (5V output)
12.8 15
%
Load regulation
10% to 100% load (9V output)
8.3 15
10% to 100% load (12V output)
6.8 15
10% to 100% load (15V output)
6.3 15
Output voltage accuracy
See tolerance envelope graph
Temperature drift
100% full load
0.03 %/°C
Output ripple &Noise* 20MHz Bandwidth
50 100 mVp-p
Full load, nominal input(24V input)
500
Switching frequency
KHz
Full load, nominal input (others input)
110
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter section, application notes.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
A_(X)T-W2
A/1-2008
Page 1 of 2