76650-0191 Datasheet, PDF (1/2 Pages) MolexKits – SMT Right Angle Plug and Receptacle and Backshell Assembiles

1801 Morgan Street
Rockford, Illinois 61102
800-435-2931
www.molexkits.com
Datasheet for 76650-0191
General Information
Part Number:
76650-0191
Manufacturer:
Molex / Waldom
Title:
TDP Connector Kit
Description:
SMT Right Angle Plug and Receptacle and Backshell Assemblies
Product Family: TDP®
Certificates:
(Molex Parts within this kit) - EU RoHS Compliant, UL and CSA
Country of Origin: Kit assembled in U.S.A.
Specifications
Design
Configuration:
Pitch:
Connector Type:
Mounting
Orientation:
Circuit Sizes:
Current Rating:
Voltage:
Wire-to-Board
1.27mm (.050")
Receptacles and Plugs
Right Angle
18 and 48
1.5 Amps (per circuit)
40 VoltsAC(RMS)
Product Highlights
The innovative TDP (Triad Differential Pair) family uses a "triad" design of
differential signal and ground lines to achieve bandwidths up to 5.0Gbps and
beyond. The shielded, dual row, cable-to-board interface offers high speed and
controlled impedance. It is comprised of a fully shielded receptacle and plug to
provide maximum EMI/RFI protection. The inline SMT receptacle optimizes PCB
routing and the low 7.67mm (.301") profile makes TDP an excellent choice where
height considerations are a factor.
TDP utilizes a high-cycle-life (5000 cycles min.) Low Force Helix™ (LFH) contact
design, providing long term performance and reliability. The recessed contacts
protect signal lines from ESD, support mating alignment and provide added contact
protection during operator handling. The TDP family is available in 18, 28 and 48
circuits. TDP cable plugs feature jackscrews for mating retention.
For additional Molex / Waldom Design and Solution Kits please go to www.molexkits.com
Page 1 of 2