19323 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – Metric Ring Terminals

High-quality, seamless-barrel metric ring terminals allow
for optimum fit and maximum electrical performance when
terminating connections to metric screws or threaded
posts and are widely used in solderless wiring applications
Introducing high-quality metric-size solderless ring terminals featuring
insulated Avikrimp^™ and un-insulated VersaKrimp^™ seamless barrel types. The
terminals provide maximum electrical performance for metric terminations
using studs up to 10mm in diameter and wire size up to 6mm².
Solderless ring terminals meet UL requirements only when crimped using
Molex recommended tooling; however terminals may be crimped with a
variety of industry-standard tooling.
For additional information visit: www.molex.com/link/metricringterminals.html
Features and Benefits
Terminals designed with metric
ring sizes
Enables universal use with metric-
size studs/screws up to 10mm in
diameter and wire sizes up to 6mm²
VersaKrimp^™ style un-insulated rings
feature a brazed seam on the crimp
barrel

Creates a seamless barrel that
eliminates the need for proper
orientation of the barrel during
crimping; permits 360° of rotation in
the crimp jaws for faster and more
reliable crimping
Avikrimp^™ style rings are pre-
insulated with Nylon on the barrel
Prevents arcing between adjacent
terminals on a barrier strip when
the barrels are exposed beyond the
edge of the strip
Nylon does not contain Halogens
and is Glow Wire tested for safety
Avikrimp^™ barrel has tin-plated
brass ferrule
Provides double-crimp: both
conductor and insulation crimp
(strain relief) for optimum vibration
resistance; fulfills TUV, VDE, IEC and
DIN requirements
Creates a seamless conductor crimp
that eliminates the need for proper
orientation of the barrel during
crimping; permits 360° of rotation in
the crimp jaws
Terminals are constructed of high-
quality, oxygen-free copper with tin
plating
Protects from oxidation, which can
result in high contact resistance and
failure; ensures a highly conductive
and reliable crimp
Terminals available on Mylar tape on
request
Allows for high-volume termination
and the most cost-effective and
efficient wire-harness production
Molex crimp tooling available
Terminals meet UL requirements
only when used with Molex
recommended tooling
Metric Ring
Terminals
19323 VersaKrimp^™ style
(un-insulated)
19324 Avikrimp^™ style
(barrel insulated)
VersaKrimp^™ and Avikrimp^™
Metric Ring Terminals
Avikrimp^™ Metric Ring
Terminal
VersaKrimp^™ Metric Ring
Terminal