PS-89675-346 Datasheet, PDF (2/3 Pages) Molex Electronics Ltd. – PS-89675-3460 SMA

PRODUCT SPECIFICATION
5.0 PERFORMANCE
5.1 ELECTRICAL REQUIREMENTS
ITEM DESCRIPTION TEST CONDITION
1
Insulation
Resistance
MIL-PRF-39012, paragraph 3.11
Dielectric
2
Withstanding
MIL-PRF-39012, paragraph 3.17
Voltage
MIL-PRF-39012, paragraph 3.16
3
Contact
Resistance
Center Contact
Outer Contact
REQUIREMENT
>=5000 Megohms
1000 Vrms
≤3 Milliohms
≤2 Milliohms
MIL-PRF-39012, paragraph 3.14
4
Voltage Standing
Wave Ratio
Standard
Precision/Field Replaceable
5
RF Leakage
MIL-PRF-39012, paragraph 3.26
MIL-PRF-39012, paragraph 3.27
6 RF Insertion Loss
Standard
Precision/Field Replaceable
7
RF High Potential _{MIL-PRF-39012, paragraph 3.23}
Withstanding
1.06 + 0.001 x f (GHz)
1.04 + .001f (GHz)
-100dB
0.04 x √f (GHz) dB
0.03 x √f (GHz) Db
750V @ 5-7.5 MHz
5.2 MECHANICAL REQUIREMENTS
ITEM DESCRIPTION TEST CONDITION
8
Material/Finish MIL-PRF-39012, paragraph 3.3
9
Design
MIL-PRF-39012, paragraph 3.4
10
Panel Nut
Torque
N/A
11
Recommended
Mating Torque
MIL-PRF-39012
12
Force to Engage and
MIL-PRF-39012, paragraph 3.5.1
Axial Force
Disengage
Radial Force
13
Coupling Proof
Torque
MIL-PRF-39012, paragraph 3.6
14
Coupling Nut
Retention Force
MIL-PRF-39012, paragraph 3.25
REQUIREMENT
See Sales Drawing
See Sales Drawing
5.30 in-lb (if applicable)
7-10 inch-pounds (steel part)
4-5 inch-pounds (brass part)
N/A
2 in-lb
15 inch-pounds
60 pounds
REVISION:
A7
ECR/ECN INFORMATION: TITLE:
EC No: ^URF2013-0054
DATE: 2012 /07/ 30
PS-89675-3460
SMA
SHEET No.
2 of 3
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-89675-346
S. SHAH/J. WIENER
T. FLAHERTY
G.HUBBARD
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC