PS-89675-140 Datasheet, PDF (2/3 Pages) Molex Electronics Ltd. – PS-89675-1400 TNC (50 AND 75 OHM)

PRODUCT SPECIFICATION
5.0 PERFORMANCE
5.1 ELECTRICAL REQUIREMENTS
ITEM DESCRIPTION TEST CONDITION
1
Insulation
Resistance
MIL-PRF-39012, paragraph 3.11
Dielectric
2
Withstanding
MIL-PRF-39012, paragraph 3.17
Voltage
3
RF High Potential
Withstanding
MIL-PRF-39012, paragraph 3.23
4
Contact
Resistance
MIL-PRF-39012, paragraph 3.16
Center Contact
Outer Contact
5
Voltage Standing
Wave Ratio
MIL-PRF-39012, paragraph 3.14
6
RF Leakage
MIL-PRF-39012, paragraph 3.26
7 RF Insertion Loss MIL-PRF-39012, paragraph 3.27
5.2 MECHANICAL REQUIREMENTS
ITEM DESCRIPTION TEST CONDITION
8
Material
MIL-PRF-39012, paragraph 3.3
9
Finish
MIL-PRF-39012, paragraph 3.3.1
10
Design
MIL-PRF-39012, paragraph 3.4
11
Recommended
Mating Torque
MIL-PRF-39012
12 Force to Engage
Axial Force
13 Force to Disengage
Axial Force
14 Coupling Retention
Axial Force
15
Coupling Proof
Torque
MIL-PRF-39012, paragraph 3.6
REQUIREMENT
5000 Megohms
1500 Vrms
1000 Vrms @ 5 MHz to 7.5
MHz
1.5 Milliohms MAX
1.0 Milliohms MAX
1.22 Typ
(Optimum Frequency of
Operation)
-60 dB Min DC to 3 GHz
.09X√f (GHz) dB
REQUIREMENT
See Sales Drawing
See Sales Drawing
See Sales Drawing
4-6 In-lbs (.49-.69 N-m)
N/A
N/A
100 lbs (444.82 N)
15 in-lb (1.69 N-m)
REVISION:
A5
ECR/ECN INFORMATION: TITLE:
EC No: URF2012-0021
DATE: 1998/01/29
PS-89675-1400
TNC (50 AND 75 OHM)
SHEET No.
2 of 3
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-89675-140
EDC/J. WIENER
DHG
GMH
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC