|
46817 Datasheet, PDF (1/4 Pages) Molex Electronics Ltd. – EXTreme Guardian™ Power Connector System | |||
|
Exceed high-current and reliability demands in top-end server and high-power
applications with Molexâs compact, EXTreme Guardian⢠header and cable
system assembly
EXTreme Guardian⢠header and cable assemblies, previously named EXTreme
Power⢠Interconnect (EPIC), features small package sizes with a centerline
pitch of 11.00mm. The system supports up to 80.0A per contact, provides good
shielding characteristics in EMI-sensitive environments, features hot-plugging
capabilities and UL safety features.
Headers are available in 2-circuit, single-flanged and 3-circuit, dual-flanged
versions. Cable assemblies are available in 3-circuit, straight, shielded and
unshielded versions for high-voltage applications and are UL touch-safe.
Additionally, the 2-circuit cabled solutions include a straight, unshielded cable
assembly; a right-angled, right-entry and left-entry unshielded version, as well as
a left-entry shielded variant for space-saving connections to servers installed in
confined spaces.
For additional information visit: www.molex.com/link/extremeguardian.html
FEATURES AND BENEFITS
⢠High-current density per inch
supports up to 80.0A per blade
(180.0A per inch)
⢠Redundant contact design handles
up to 600V and supports AC or DC
high-voltage applications with the
lowest feasible voltage drop and
I2R (irreversible dissipative power)
losses
⢠Small centerline spacing of
11.00mm reduces PCB footprint
compared to legacy power products
⢠Recessed terminals, First-Mate-
Last-Break (FMLB) allow hot-
swapping of power units and reduce
network downtime
⢠Gold or tin contact plating
provides flexibility to suit customer
applications; gold plating provides
low interface resistance
⢠UL and CSA certifications meet
all accredited agency safety
requirement and approvals
PCB Headers
⢠Locating pegs enable accurate
through-hole positioning of
connector on PCB
⢠Through-hole solder retention design
provides flexible manufacturing
options
⢠Insert-molded threaded nut provides
secure panel attachment
Cable Assemblies
⢠Crimp terminal accepts 10, 8 and
12/12 or 6 AWG wires; supports
heavier gauge wire with no terminal
back-out issues
⢠EMI shielding options (for shielded
versions) minimize cross-talk and
improve immunity to external noise
⢠Terminal Position Assurance (TPA)
option available secures cable from
accidental cable disconnection
⢠Mounting jackscrews improve cable
retention after mating to PCB
header
⢠Standard overmold provides strain
relief and wire management in
rugged environments
EXTreme Guardianâ¢
Power Connector System
46817 PCB Headers, Single
and Dual Flange, 2
and 3 Circuits
46818 Power Harness
Connector
46819 High Power Terminal
68790 Power Cable
Assemblies, Straight,
Unshielded, 2 Circuits
68790 Power Cable
Assemblies, Right-
Angle, Shielded or
Unshielded, Left- or
Right-Entry, 2 Circuits
111119 Power Cable
Assemblies,
Straight, Shielded
or Unshielded, Low
Profile, 3 Circuits
EXTreme Guardian⢠Power Connector System
|
▷ |