180330-0002 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – LED Array Holder for Sharp* Mega Zenigata (COB) and Sharp Mini Zenigata (COB) Arrays

Molex LED Array Holders simplify the installation process
for small-fixture applications for OEMs using Sharp* Mega
and Mini Zenigata arrays to reduce installation time with
compression contacts that eliminate hand soldering
LED technology has been proven to reduce the amount of energy consumed
and is becoming a more reliable, efficient and user-friendly way for
accommodating general illumination requirements. Using unmatched
interconnect technology, Molex provides a solderless solution to mounting
LED arrays into OEM designs. The holders allow customers to install LED
arrays quickly into fixtures, enable field replacements and facilitate upgrades
to current applications.
Features and Benefits
Compression contacts deliver
power to array
Stable connection in high-ambient
temperature. Simplifies the LED
installation process by eliminating
hand soldering or expensive Surface
Mount Technology (SMT) equipment.
Reduces installation time
Double-ended wire-trap terminal to
attach power source
Allows for wiring serial or parallel
LED sequences, ensuring ease of
array assembly
Screw-mount attachment method
for securing array to heat sink
Provides voltage isolation between
LED and heat sink with external
mounting holes
Releasable wire trap for rework or
replacement
Allows for field serviceability
High-temperature thermoplastic
housing
Supports high heat-generating
environments
Overall form factor is less than
50.00mm in diameter for Mega
Zenigata (COB) arrays and 30.00 by
36.20mm for Mini Zenigata (COB) arrays
Ideal for lamp and small-fixture
applications
Optional Zhaga cover for Mega
Zenigata array only
Provides Zhaga compliant landing
interface for optical
LED Array Holder
for Sharp* Mega
Zenigata (COB)
and Sharp Mini
Zenigata (COB)
Arrays
180330 M ega Zenigata (COB)
Array
180390 Mini Zenigata (COB)
Array
LED Array Holder for
Mega Zenigata (COB)
Array
LED Array Holder for
Mini Zenigata (COB)
Array
Specifications
Reference Information
Packaging: Tray
UL File No.: Pending
CSA File No.: Pending
Designed In: Millimeters
RoHS: Yes
REACH: Yes
Electrical
Voltage (max.): 300V DC
Current (max.):
M ega Zenigata – 2.5A continuous;
3.5A max.
Mini Zenigata – 3.0A continuous; 4.0
Contact Resistance:
20 milliohms max.
Dielectric Withstanding Voltage:
300V DC
Insulation Resistance:
5000 Megohms min.
Mechanical
Wire Insertion Force:
5N (1.12 lbf) max.
Wire Pull Out Force:
25N (5.62 lbf) max.
Durability (min.):
Mega Zenigata – 5 Cycles
Mini Zenigata – 20 Cycles
*Sharp is a registered trademark of Sharp Electronics Corporation
Physical
Housing: PA66 Nylon GF
Contact:
Copper (Cu), Nickel (Ni) and Silver (Ag)
Plating:
Contact Area — Select Gold (Au)
Solder Tail Area — Silver (Ag)
Underplating — Nickel (Ni)